[Wed Jul  4 09:35:12 2012] Detection parameters:
  Position = (144.1, 205.9) = 1 15 17.11 -73 23 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.8 +/- 23.0
  Background counts = 13.5
  Rate = 0.01 +/- 0.0007

[Wed Jul  4 09:35:13 2012] Off-axis axis estimate = 13.04'
[Wed Jul  4 09:55:45 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 09:55:45 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Wed Jul  4 09:55:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Wed Jul  4 09:55:45 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.95"
[Wed Jul  4 11:04:21 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul  4 11:04:21 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul  4 11:04:21 2012] Fit fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed Jul  4 11:04:21 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul  4 11:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul  4 11:04:21 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul  4 11:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul  4 11:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601212501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:29:08 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.461230 pixels away
[Wed Jul  4 11:29:08 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:29:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:29:08 2012] Assessing source extent using major
[Wed Jul  4 11:29:08 2012] Source does appear to be extended
[Wed Jul  4 11:29:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 11:29:08 2012] Source is confused with source 1
[Wed Jul  4 11:59:03 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:59:03 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Wed Jul  4 11:59:03 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Wed Jul  4 11:59:03 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.95"
[Wed Jul  4 12:58:47 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul  4 12:58:47 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul  4 12:58:47 2012] Fit fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Jul  4 12:58:47 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul  4 12:58:47 2012] fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul  4 12:58:47 2012] Fit fullrun_mos1_xmm0601212501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul  4 13:24:02 2012] Spatial fit model total counts = 1272.390000, observed total counts = 1261.000000
[Wed Jul  4 13:24:02 2012] Offset between fit and detection position for source 3 = 4.607390 pixels
[Wed Jul  4 13:24:02 2012] Warning, changing simple spatial fit ID from 4 to 2
[Wed Jul  4 13:24:02 2012] 1290.104000 total counts/ 164.774000 bgd. counts: snr = 87.666881
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.607390 pixels
  Position = (141.2, 202.3) = 1 15 20.10 -73 23 44.9
  Extent = 26.3 (25.6-52.6)" x 19.0 (19.0-19.0)", rotation angle = 71 (71-76) degrees
  Source counts = 1125.3 +/- 35.9
  Background counts = 164.8
  Rate = 0.03 +/- 0.001
[Wed Jul  4 13:24:02 2012] Spatial fit model total counts = 889.026000, observed total counts = 853.000000
[Wed Jul  4 13:24:02 2012] Offset between fit and detection position for source 3 = 2.833814 pixels
[Wed Jul  4 13:24:02 2012] Warning, changing simple spatial fit ID from 2 to 6
[Wed Jul  4 13:24:02 2012] 787.913295 total counts/ 0.055295 bgd. counts: snr = 3350.455391
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.833814 pixels
  Position = (144.0, 201.6) = 1 15 17.34 -73 23 48.4
  Extent = 20.6 (18.6-23.1)", rotation angle = 0
  Source counts = 787.9 +/- 28.1
  Background counts = 0.1
  Rate = 0.02 +/- 0.0008
[Wed Jul  4 13:24:02 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:24:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:24:02 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 13:24:02 2012] Source does appear to be extended
[Wed Jul  4 13:24:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 13:50:24 2012] XMMSAS src. selection expression = ellipse(12476.204000, 17488.428000, 1236.738036, 1236.738036, 0.000000, X, Y)
[Wed Jul  4 13:50:24 2012] Writing source region out to fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul  4 13:50:24 2012] Extracting stamp from image fullrun_mos1_xmm0601212501_pi300-10000_cl_sm2.00.img.gz, (73, 130) - (215, 273)
[Wed Jul  4 13:50:24 2012] XMMSAS bgd. selection expression = annulus(12476.204000, 17488.428000, 2061.230059, 4122.460119, X, Y) && !ellipse(10917.996292, 18655.598618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11855.440674, 17974.947342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11502.754000, 18372.098000, 2105.064061, 1043.160030, 30.871000, X, Y) && !ellipse(12099.242722, 17096.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12006.412277, 15709.890076, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 13:50:24 2012] Writing fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3.gif
[Wed Jul  4 13:51:16 2012] Mean detx,y = (-8667.01, 12810.13) 
[Wed Jul  4 13:51:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 13:51:47 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 13:51:47 2012] Setting source spectrum file to fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul  4 13:51:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul  4 14:30:36 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:30:36 2012] Error reading totcts from fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul  4 14:30:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:30:36 2012] Using photon index=1.80, rate=0.0236, arf fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3.arf
[Wed Jul  4 14:30:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:30:36 2012] Updating source flux to 5.1e-13
[Wed Jul  4 14:30:38 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Jul  4 14:31:08 2012] Reading fit data from xmm0601212501/analysis//spectral/fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_pl.csv
[Wed Jul  4 14:31:08 2012] Spectral fit parameter nH value = 1.932e+20
[Wed Jul  4 14:31:08 2012] Spectral fit parameter PhoIndex value = 0.794089
[Wed Jul  4 14:31:08 2012] Failed to get F(0.3-8.0) from xmm0601212501/analysis//spectral/fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 14:31:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:31:08 2012] Using Nh = 1.9e+20, photon index=0.79, rate=0.0236, arf fullrun_mos1_xmm0601212501_pi300-10000_pass1_cl_src3.arf
[Wed Jul  4 14:31:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:31:08 2012] Updating source flux to 9.3e-13