[Sat May 26 13:02:47 2012] Detection parameters:
  Position = (314.7, 95.0) = 1 16 56.13 -73 17 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.1 +/- 24.1
  Background counts = 33.6
  Rate = 0.008 +/- 0.0008

[Sat May 26 13:02:48 2012] Off-axis axis estimate = 14.80'
[Sat May 26 13:05:23 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Sat May 26 13:05:23 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Sat May 26 13:05:23 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.034
[Sat May 26 13:05:23 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.83"
[Sat May 26 15:20:40 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_src18.ximg exists
[Sat May 26 15:20:40 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat May 26 15:20:40 2012] Fit fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_src18 appears to have run properly
[Sat May 26 15:20:41 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat May 26 15:20:41 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat May 26 15:20:41 2012] Fit fullrun_pn_xmm0601212301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat May 26 18:08:05 2012] Source 18 is offset by -6.634217 and 2.942060 pixels which is larger than
2 X fitted extent = 3.463402 x 3.463402, not incorporating fit results
[Sat May 26 18:08:05 2012] Spatial fit model total counts = 2019.690000, observed total counts = 2006.000000
[Sat May 26 18:08:05 2012] Offset between fit and detection position for source 18 = 1.347502 pixels
[Sat May 26 18:08:05 2012] 1875.923000 total counts/ 1418.320000 bgd. counts: snr = 12.150713
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.347502 pixels
  Position = (315.5, 93.9) = 1 16 55.24 -73 17 18.5
  Extent = 27.7 (26.0-55.3)" x 4.8 (4.2-5.5)", rotation angle = 17 (15-20) degrees
  Source counts = 457.6 +/- 43.3
  Background counts = 1418.3
  Rate = 0.01 +/- 0.001
[Sat May 26 18:08:05 2012] Vigneting correction estimate = 1.000000
[Sat May 26 18:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 18:08:05 2012] Assessing source extent using major axis lower bound
[Sat May 26 18:08:05 2012] Source does appear to be extended
[Sat May 26 18:08:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.71
[Sat May 26 18:08:05 2012] Source is asymmetric
[Sat May 26 18:08:05 2012] Source is confused with source 1
[Sat May 26 18:08:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 18:08:24 2012] Initial guess for spatial extent in simple fitting = 16.23"
[Sat May 26 18:08:24 2012] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.006
[Sat May 26 18:08:24 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 16.23"
[Sat May 26 22:43:10 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18.ximg exists
[Sat May 26 22:43:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18.csv
[Sat May 26 22:43:10 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat May 26 22:43:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18.csv
[Sat May 26 22:43:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 22:43:11 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat May 26 22:43:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May 26 22:43:11 2012] fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May 26 22:43:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May 26 22:43:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601212301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 05:53:47 2012] Warning, spatial fit 18 centroid is now closest to src. 16
[Sun May 27 05:53:47 2012] Vigneting correction estimate = 1.000000
[Sun May 27 05:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 05:53:47 2012] Assessing source extent using major axis lower bound
[Sun May 27 05:53:47 2012] Source does appear to be extended
[Sun May 27 05:53:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.71
[Sun May 27 05:53:47 2012] Source is asymmetric
[Sun May 27 05:54:05 2012] XMMSAS src. selection expression = ellipse(27403.340800, 8123.905400, 1659.378048, 287.704808, 17.435400, X, Y)
[Sun May 27 05:54:05 2012] Writing source region out to fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18_src.reg
[Sun May 27 05:54:05 2012] Extracting stamp from image fullrun_pn_xmm0601212301_pi300-10000_cl_sm2.00.img.gz, (220, 0) - (411, 189)
[Sun May 27 05:54:05 2012] XMMSAS bgd. selection expression = annulus(27403.340800, 8123.905400, 2765.630080, 5531.260159, X, Y) && !ellipse(27482.212000, 8681.704000, 637.136018, 637.136018, 0.000000, X, Y) && !ellipse(26289.271149, 8234.518356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.716000, 9003.940000, 608.636018, 608.636018, 0.000000, X, Y) && !ellipse(25784.558044, 8822.904045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.176000, 8414.236000, 1828.136053, 1828.136053, 0.000000, X, Y) && !ellipse(28821.292938, 7769.535110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29812.396790, 11142.656906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.386810, 10146.159363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.534000, 10319.372000, 979.912028, 979.912028, 0.000000, X, Y) && !ellipse(28258.928528, 9705.234001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.946000, 8999.326600, 2157.312062, 445.088013, -0.000000, X, Y) && !ellipse(26903.222778, 8288.435364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29584.382874, 7878.531364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.418610, 10932.333450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.882660, 10677.749992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.065857, 9527.894638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29134.228000, 8811.546000, 517.137615, 517.137615, 0.000000, X, Y) && !ellipse(32502.034393, 9575.610161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24865.578064, 9171.935524, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 05:54:05 2012] Writing fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18.gif
[Sun May 27 06:08:14 2012] Mean detx,y = (12849.95, -9583.47) 
[Sun May 27 06:08:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 06:09:09 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 06:09:10 2012] Setting source spectrum file to fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun May 27 06:09:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun May 27 07:32:15 2012] Updating aperture counts using extracted products
[Sun May 27 07:32:15 2012] Error reading totcts from fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun May 27 07:32:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 07:32:16 2012] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0601212301_pi300-10000_pass1_cl_src18.arf
[Sun May 27 07:32:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 07:32:16 2012] Updating source flux to 9.5e-14
[Sun May 27 07:33:26 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Sun May 27 07:33:26 2012] Flag c found in src. 18 procflags, skipping spectral fitting