[Thu Jun 28 12:56:35 2012] Detection parameters:
  Position = (269.2, 277.0) = 1 4 55.56 -72 24 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1840.0 +/- 55.3
  Background counts = 95.7
  Rate = 0.08 +/- 0.002

[Thu Jun 28 12:56:36 2012] Off-axis axis estimate = 2.63'
[Thu Jun 28 13:00:44 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 13:00:44 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Thu Jun 28 13:00:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Thu Jun 28 13:00:44 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.74"
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9.csv
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9.csv
[Thu Jun 28 14:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 28 14:01:41 2012] Fit fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun 28 15:07:41 2012] Spatial fit model total counts = 11197.900000, observed total counts = 8402.000000
[Thu Jun 28 15:07:41 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 28 15:07:41 2012] Spatial fit model total counts = 6127.510000, observed total counts = 6124.000000
[Thu Jun 28 15:07:41 2012] Offset between fit and detection position for source 9 = 0.687342 pixels
[Thu Jun 28 15:07:41 2012] 6320.130000 total counts/ 4351.800000 bgd. counts: snr = 29.837570
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.687342 pixels
  Position = (269.8, 277.4) = 1 4 55.04 -72 24 21.0
  Extent = 15.5 (15.4-15.5)", rotation angle = 0
  Source counts = 1968.3 +/- 79.5
  Background counts = 4351.8
  Rate = 0.09 +/- 0.003
[Thu Jun 28 15:07:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 15:07:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 15:07:41 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 15:07:41 2012] Source does appear to be extended
[Thu Jun 28 15:07:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:07:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:07:59 2012] Initial guess for spatial extent in simple fitting = 15.46"
[Thu Jun 28 15:07:59 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.973
[Thu Jun 28 15:07:59 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.46"
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9.csv
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9.csv
[Thu Jun 28 16:11:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:11:11 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 28 16:11:11 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 28 16:11:11 2012] Fit fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun 28 16:59:00 2012] Warning, spatial fit 9 centroid is now closest to src. 1
[Thu Jun 28 16:59:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 16:59:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 16:59:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 16:59:00 2012] Source does appear to be extended
[Thu Jun 28 16:59:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 16:59:10 2012] Counts = 1968.330000, rescaling region sizes by 2.000000
[Thu Jun 28 16:59:10 2012] XMMSAS src. selection expression = ellipse(23420.295200, 24088.968400, 1855.668053, 1855.668053, 0.000000, X, Y)
[Thu Jun 28 16:59:10 2012] Writing source region out to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 28 16:59:10 2012] Extracting stamp from image fullrun_pn_xmm0601211801_pi300-10000_cl_sm2.00.img.gz, (163, 171) - (376, 384)
[Thu Jun 28 16:59:10 2012] XMMSAS bgd. selection expression = annulus(23420.295200, 24088.968400, 6185.560178, 12371.120356, X, Y) && !ellipse(22652.632385, 25722.204681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22641.415000, 26122.797800, 1251.144036, 1251.144036, 0.000000, X, Y) && !ellipse(24048.930878, 25351.700653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21329.065765, 25100.694183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.941254, 24988.304138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21785.076340, 24146.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12353.931717, 23463.563293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21744.998672, 26804.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35344.163605, 34773.706665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19920.086853, 37059.445282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.553589, 16620.335464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17780.609818, 28069.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25248.608521, 27209.591919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22338.956604, 27261.218964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17075.430000, 25302.908400, 1639.592047, 1639.592047, 0.000000, X, Y) && !ellipse(26930.963580, 24468.063680, 370.258411, 370.258411, 0.000000, X, Y) && !ellipse(33234.736000, 23145.546200, 461.951213, 461.951213, 0.000000, X, Y)
[Thu Jun 28 16:59:10 2012] Writing fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9.gif
[Thu Jun 28 17:26:20 2012] Mean detx,y = (-1503.33, 4444.68) 
[Thu Jun 28 17:26:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 17:30:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 17:30:55 2012] Setting source spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 28 17:30:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 28 18:44:22 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:44:22 2012] Error reading totcts from fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 28 18:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:44:22 2012] Using photon index=1.80, rate=0.0861, arf fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src9.arf
[Thu Jun 28 18:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:44:22 2012] Updating source flux to 2.2e-13
[Thu Jun 28 18:46:05 2012] Flag p found in src. 9 procflags, skipping spectral fitting