[Thu Jun 28 12:56:35 2012] Detection parameters:
  Position = (260.2, 301.9) = 1 5 4.12 -72 22 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3968.0 +/- 77.8
  Background counts = 100.5
  Rate = 0.2 +/- 0.004

[Thu Jun 28 12:56:36 2012] Off-axis axis estimate = 2.78'
[Thu Jun 28 13:00:44 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 13:00:44 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Thu Jun 28 13:00:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.947
[Thu Jun 28 13:00:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.82"
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3.csv
[Thu Jun 28 14:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 28 14:01:41 2012] Fit fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 28 15:07:41 2012] Spatial fit model total counts = 12471.400000, observed total counts = 11977.000000
[Thu Jun 28 15:07:41 2012] Offset between fit and detection position for source 3 = 1.222637 pixels
[Thu Jun 28 15:07:41 2012] 11827.740000 total counts/ 7627.030000 bgd. counts: snr = 48.099989
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.222637 pixels
  Position = (260.8, 300.8) = 1 5 3.57 -72 22 39.2
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 4200.7 +/- 108.8
  Background counts = 7627.0
  Rate = 0.2 +/- 0.005
[Thu Jun 28 15:07:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 15:07:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 15:07:41 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 15:07:41 2012] Source does appear to be extended
[Thu Jun 28 15:07:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:07:41 2012] Source is confused with source 1
[Thu Jun 28 15:07:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:07:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 15:07:59 2012] Initial guess for spatial extent in simple fitting = 15.64"
[Thu Jun 28 15:07:59 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.954
[Thu Jun 28 15:07:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 15.64"
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 16:11:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 28 16:11:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:59:00 2012] Warning, spatial fit 3 centroid is now closest to src. 16
[Thu Jun 28 16:59:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 16:59:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 16:59:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 16:59:00 2012] Source does appear to be extended
[Thu Jun 28 16:59:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 16:59:09 2012] Counts = 4200.710000, rescaling region sizes by 2.000000
[Thu Jun 28 16:59:09 2012] XMMSAS src. selection expression = ellipse(22641.415000, 26122.797800, 1876.716054, 1876.716054, 0.000000, X, Y)
[Thu Jun 28 16:59:09 2012] Writing source region out to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 28 16:59:09 2012] Extracting stamp from image fullrun_pn_xmm0601211801_pi300-10000_cl_sm2.00.img.gz, (153, 193) - (369, 409)
[Thu Jun 28 16:59:09 2012] XMMSAS bgd. selection expression = annulus(22641.415000, 26122.797800, 6255.720180, 12511.440360, X, Y) && !ellipse(22652.632385, 25722.204681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24048.930878, 25351.700653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21329.065765, 25100.694183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.941254, 24988.304138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21785.076340, 24146.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12353.931717, 23463.563293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23420.295200, 24088.968400, 1237.112036, 1237.112036, 0.000000, X, Y) && !ellipse(21744.998672, 26804.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35344.163605, 34773.706665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19920.086853, 37059.445282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.553589, 16620.335464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17780.609818, 28069.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25248.608521, 27209.591919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22338.956604, 27261.218964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17075.430000, 25302.908400, 1639.592047, 1639.592047, 0.000000, X, Y) && !ellipse(26930.963580, 24468.063680, 370.258411, 370.258411, 0.000000, X, Y) && !ellipse(33234.736000, 23145.546200, 461.951213, 461.951213, 0.000000, X, Y) && !ellipse(22085.923019, 39122.326050, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 16:59:09 2012] Writing fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3.gif
[Thu Jun 28 17:06:01 2012] Mean detx,y = (-2628.09, 4270.71) 
[Thu Jun 28 17:06:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 17:12:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 17:12:17 2012] Setting source spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 28 17:12:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 28 18:44:22 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:44:22 2012] Error reading totcts from fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 28 18:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:44:22 2012] Using photon index=1.80, rate=0.184, arf fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3.arf
[Thu Jun 28 18:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:44:22 2012] Updating source flux to 5.2e-13
[Thu Jun 28 18:46:05 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu Jun 28 18:47:19 2012] Reading fit data from xmm0601211801/analysis//spectral/fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_pl.csv
[Thu Jun 28 18:47:19 2012] Spectral fit parameter nH value = 6.81371e+21
[Thu Jun 28 18:47:19 2012] Spectral fit parameter PhoIndex value = 8.14575
[Thu Jun 28 18:47:19 2012] Failed to get F(0.3-8.0) from xmm0601211801/analysis//spectral/fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 18:47:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:47:19 2012] Using Nh = 6.8e+21, photon index=8.15, rate=0.184, arf fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src3.arf
[Thu Jun 28 18:47:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:47:19 2012] Updating source flux to 2.7e-13