[Thu Jun 28 12:56:35 2012] Detection parameters:
  Position = (260.9, 296.2) = 1 5 3.45 -72 23 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3249.3 +/- 72.8
  Background counts = 99.6
  Rate = 0.2 +/- 0.003

[Thu Jun 28 12:56:36 2012] Off-axis axis estimate = 2.72'
[Thu Jun 28 13:00:44 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 13:00:44 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jun 28 13:00:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.953
[Thu Jun 28 13:00:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.79"
[Thu Jun 28 14:01:40 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1.csv
[Thu Jun 28 14:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 28 14:01:41 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 28 14:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 28 14:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 15:07:41 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Thu Jun 28 15:07:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 15:07:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 15:07:41 2012] Assessing source extent using major
[Thu Jun 28 15:07:41 2012] Source does appear to be extended
[Thu Jun 28 15:07:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:07:41 2012] Source is confused with source 3
[Thu Jun 28 15:07:59 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 15:07:59 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Thu Jun 28 15:07:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.953
[Thu Jun 28 15:07:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.79"
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 16:11:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 28 16:11:10 2012] fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 16:11:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 28 16:11:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:59:00 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Thu Jun 28 16:59:00 2012] Source 1 is offset by 5.152234 and 3.995318 pixels which is larger than
2 X fitted extent = 1.777462 x 1.777462, not incorporating fit results
[Thu Jun 28 16:59:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 16:59:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 16:59:00 2012] Assessing source extent using major
[Thu Jun 28 16:59:00 2012] Source does appear to be extended
[Thu Jun 28 16:59:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 16:59:09 2012] Counts = 3249.327148, rescaling region sizes by 2.000000
[Thu Jun 28 16:59:09 2012] XMMSAS src. selection expression = ellipse(22652.632385, 25722.204681, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 28 16:59:09 2012] Writing source region out to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 16:59:09 2012] Extracting stamp from image fullrun_pn_xmm0601211801_pi300-10000_cl_sm2.00.img.gz, (186, 221) - (336, 371)
[Thu Jun 28 16:59:09 2012] XMMSAS bgd. selection expression = annulus(22652.632385, 25722.204681, 4350.000000, 8700.000000, X, Y) && !ellipse(22641.415000, 26122.797800, 1251.144036, 1251.144036, 0.000000, X, Y) && !ellipse(24048.930878, 25351.700653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21329.065765, 25100.694183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.941254, 24988.304138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21785.076340, 24146.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23420.295200, 24088.968400, 1237.112036, 1237.112036, 0.000000, X, Y) && !ellipse(21744.998672, 26804.524719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.553589, 16620.335464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17780.609818, 28069.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25248.608521, 27209.591919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22338.956604, 27261.218964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17075.430000, 25302.908400, 1639.592047, 1639.592047, 0.000000, X, Y) && !ellipse(26930.963580, 24468.063680, 370.258411, 370.258411, 0.000000, X, Y)
[Thu Jun 28 16:59:09 2012] Writing fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 16:59:27 2012] Mean detx,y = (-2644.57, 4318.78) 
[Thu Jun 28 16:59:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 17:03:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 17:03:04 2012] Setting source spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 17:03:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 17:40:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 17:40:17 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:44:22 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:44:22 2012] Error reading totcts from fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 18:44:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:44:22 2012] Using photon index=1.80, rate=0.156, arf fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 18:44:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:44:22 2012] Updating source flux to 5.3e-13
[Thu Jun 28 18:46:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 28 18:47:19 2012] xmm0601211801/analysis//spectral/fullrun_pn_xmm0601211801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete