[Thu Jun 28 12:57:06 2012] Detection parameters:
  Position = (408.1, 162.7) = 1 2 41.49 -72 32 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.1 +/- 21.1
  Background counts = 39.4
  Rate = 0.008 +/- 0.0007

[Thu Jun 28 12:57:06 2012] Off-axis axis estimate = 12.65'
[Thu Jun 28 14:01:41 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 14:01:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 14:01:41 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Thu Jun 28 14:01:41 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.040
[Thu Jun 28 14:01:41 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.75"
[Thu Jun 28 14:51:02 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 28 14:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11.csv
[Thu Jun 28 14:51:02 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 28 14:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11.csv
[Thu Jun 28 14:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 14:51:03 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 28 14:51:03 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 28 14:51:03 2012] Fit fullrun_mos1_xmm0601211801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jun 28 15:07:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.700711 pixels away
[Thu Jun 28 15:07:47 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 15:07:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 15:07:47 2012] Assessing source extent using major
[Thu Jun 28 15:07:47 2012] Source does appear to be extended
[Thu Jun 28 15:07:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 16:11:11 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 16:11:11 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Thu Jun 28 16:11:11 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.040
[Thu Jun 28 16:11:11 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.75"
[Thu Jun 28 16:53:10 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun 28 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10.csv
[Thu Jun 28 16:53:10 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun 28 16:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10.csv
[Thu Jun 28 16:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 16:53:10 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 28 16:53:10 2012] fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 28 16:53:10 2012] Fit fullrun_mos1_xmm0601211801_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Jun 28 16:59:03 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.317940 pixels away
[Thu Jun 28 16:59:03 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 16:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 16:59:03 2012] Assessing source extent using major
[Thu Jun 28 16:59:03 2012] Source does appear to be extended
[Thu Jun 28 16:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 18:00:58 2012] XMMSAS src. selection expression = ellipse(35456.973145, 14109.060074, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 18:00:58 2012] Writing source region out to fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19_src.reg
[Thu Jun 28 18:00:58 2012] Extracting stamp from image fullrun_mos1_xmm0601211801_pi300-10000_cl_sm2.00.img.gz, (371, 125) - (446, 200)
[Thu Jun 28 18:00:58 2012] XMMSAS bgd. selection expression = annulus(35456.973145, 14109.060074, 1087.500000, 2175.000000, X, Y)
[Thu Jun 28 18:00:58 2012] Writing fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19.gif
[Thu Jun 28 18:07:32 2012] Mean detx,y = (431.90, 13715.21) 
[Thu Jun 28 18:07:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 18:07:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 18:07:56 2012] Setting source spectrum file to fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jun 28 18:07:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jun 28 18:26:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 18:26:46 2012] rmf not generated due to insufficient counts
[Thu Jun 28 18:44:23 2012] Updating aperture counts using extracted products
[Thu Jun 28 18:44:23 2012] Error reading totcts from fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jun 28 18:44:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 18:44:24 2012] Using photon index=1.80, rate=0.00775, arf fullrun_mos1_xmm0601211801_pi300-10000_pass1_cl_src19.arf
[Thu Jun 28 18:44:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 18:44:24 2012] Updating source flux to 1.9e-13
[Thu Jun 28 18:44:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting