[Thu Mar  8 16:17:05 2012] Detection parameters:
  Position = (499.1, 262.0) = 0 59 28.04 -72 37 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.1 +/- 28.3
  Background counts = 105.8
  Rate = 0.01 +/- 0.0008

[Thu Mar  8 16:17:06 2012] Off-axis axis estimate = 14.78'
[Thu Mar  8 16:52:52 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:52:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 16:52:52 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Thu Mar  8 16:52:52 2012] source mask rpix=3.2, npix_max = 54, mask sum = 60, frac = 1.109
[Thu Mar  8 16:52:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.82"
[Thu Mar  8 17:12:57 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar  8 17:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4.csv
[Thu Mar  8 17:12:57 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar  8 17:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4.csv
[Thu Mar  8 17:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 17:12:57 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar  8 17:12:57 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar  8 17:12:57 2012] Fit fullrun_mos1_xmm0601211701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Mar  8 17:49:29 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.046292 pixels away
[Thu Mar  8 17:49:29 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 17:49:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 17:49:29 2012] Assessing source extent using major
[Thu Mar  8 17:49:29 2012] Source does appear to be extended
[Thu Mar  8 17:49:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 18:24:03 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 18:24:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 18:24:03 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Thu Mar  8 18:24:03 2012] source mask rpix=3.2, npix_max = 54, mask sum = 60, frac = 1.109
[Thu Mar  8 18:24:03 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.82"
[Thu Mar  8 18:45:01 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4.ximg exists
[Thu Mar  8 18:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4.csv
[Thu Mar  8 18:45:01 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Mar  8 18:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4.csv
[Thu Mar  8 18:45:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 18:45:01 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Mar  8 18:45:01 2012] fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Mar  8 18:45:01 2012] Fit fullrun_mos1_xmm0601211701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Mar  8 19:26:51 2012] Spatial fit model total counts = 463.125000, observed total counts = 417.000000
[Thu Mar  8 19:26:51 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 19:26:51 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:26:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:26:51 2012] Assessing source extent using major
[Thu Mar  8 19:26:51 2012] Source does appear to be extended
[Thu Mar  8 19:26:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:51:48 2012] XMMSAS src. selection expression = ellipse(43369.698547, 22747.631989, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar  8 19:51:48 2012] Writing source region out to fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar  8 19:51:48 2012] Extracting stamp from image fullrun_mos1_xmm0601211701_pi300-10000_cl_sm2.00.img.gz, (462, 225) - (537, 300)
[Thu Mar  8 19:51:48 2012] XMMSAS bgd. selection expression = annulus(43369.698547, 22747.631989, 1087.500000, 2175.000000, X, Y)
[Thu Mar  8 19:51:48 2012] Writing fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2.gif
[Thu Mar  8 19:52:41 2012] Mean detx,y = (15660.83, 3338.83) 
[Thu Mar  8 19:52:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar  8 19:53:03 2012] Binned source spectrum to 10 counts/bin
[Thu Mar  8 19:53:03 2012] Setting source spectrum file to fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 19:53:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar  8 20:04:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar  8 20:04:28 2012] rmf not generated due to insufficient counts
[Thu Mar  8 20:26:00 2012] Updating aperture counts using extracted products
[Thu Mar  8 20:26:00 2012] Error reading totcts from fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar  8 20:26:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar  8 20:26:01 2012] Using photon index=1.80, rate=0.00994, arf fullrun_mos1_xmm0601211701_pi300-10000_pass1_cl_src2.arf
[Thu Mar  8 20:26:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar  8 20:26:01 2012] Updating source flux to 2.6e-13
[Thu Mar  8 20:26:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting