[Wed May 23 15:13:00 2012] Detection parameters:
  Position = (265.3, 167.7) = 0 59 14.06 -72 57 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.1 +/- 20.2
  Background counts = 79.1
  Rate = 0.007 +/- 0.0008

[Wed May 23 15:13:01 2012] Off-axis axis estimate = 9.78'
[Wed May 23 16:05:56 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Wed May 23 16:05:56 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Wed May 23 16:05:56 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Wed May 23 16:05:56 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.32"
[Wed May 23 16:23:47 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 23 16:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3.csv
[Wed May 23 16:23:47 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 23 16:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3.csv
[Wed May 23 16:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 16:23:47 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 23 16:23:47 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 23 16:23:47 2012] Fit fullrun_mos1_xmm0601211601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 23 16:47:36 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.721440 pixels away
[Wed May 23 16:47:36 2012] Vigneting correction estimate = 1.000000
[Wed May 23 16:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 16:47:36 2012] Assessing source extent using major
[Wed May 23 16:47:36 2012] Source does appear to be extended
[Wed May 23 16:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 17:26:37 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Wed May 23 17:26:37 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Wed May 23 17:26:37 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Wed May 23 17:26:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.32"
[Wed May 23 17:44:56 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 23 17:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3.csv
[Wed May 23 17:44:56 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 23 17:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3.csv
[Wed May 23 17:44:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 17:44:56 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 23 17:44:56 2012] fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 23 17:44:56 2012] Fit fullrun_mos1_xmm0601211601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 23 18:04:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.135984 pixels away
[Wed May 23 18:04:37 2012] Vigneting correction estimate = 1.000000
[Wed May 23 18:04:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 18:04:37 2012] Assessing source extent using major
[Wed May 23 18:04:37 2012] Source does appear to be extended
[Wed May 23 18:04:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 18:44:38 2012] XMMSAS src. selection expression = ellipse(23032.367950, 14541.884277, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 18:44:38 2012] Writing source region out to fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2_src.reg
[Wed May 23 18:44:38 2012] Extracting stamp from image fullrun_mos1_xmm0601211601_pi300-10000_cl_sm2.00.img.gz, (228, 130) - (303, 205)
[Wed May 23 18:44:38 2012] XMMSAS bgd. selection expression = annulus(23032.367950, 14541.884277, 1087.500000, 2175.000000, X, Y)
[Wed May 23 18:44:38 2012] Writing fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2.gif
[Wed May 23 18:45:29 2012] Mean detx,y = (-4763.62, 9903.47) 
[Wed May 23 18:45:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 18:45:43 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 18:45:43 2012] Setting source spectrum file to fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 23 18:45:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 23 18:52:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 18:52:26 2012] rmf not generated due to insufficient counts
[Wed May 23 19:08:55 2012] Updating aperture counts using extracted products
[Wed May 23 19:08:55 2012] Error reading totcts from fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 23 19:08:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 19:08:56 2012] Using photon index=1.80, rate=0.00738, arf fullrun_mos1_xmm0601211601_pi300-10000_pass1_cl_src2.arf
[Wed May 23 19:08:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 19:08:56 2012] Updating source flux to 1.2e-13
[Wed May 23 19:08:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting