[Sat May 19 20:46:59 2012] Detection parameters:
  Position = (374.5, 137.0) = 0 55 29.24 -73 13 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 14.7
  Background counts = 46.6
  Rate = 0.002 +/- 0.0004

[Sat May 19 20:46:59 2012] Off-axis axis estimate = 12.93'
[Sat May 19 20:49:47 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Sat May 19 20:49:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 20:49:47 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Sat May 19 20:49:47 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Sat May 19 20:49:47 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.90"
[Sat May 19 21:36:50 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28.ximg exists
[Sat May 19 21:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28.csv
[Sat May 19 21:36:50 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat May 19 21:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28.csv
[Sat May 19 21:36:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 21:36:50 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat May 19 21:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat May 19 21:36:50 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat May 19 21:36:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat May 19 21:36:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 22:28:26 2012] Spatial fit model total counts = 636.346000, observed total counts = 511.000000
[Sat May 19 22:28:26 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 22:28:26 2012] Vigneting correction estimate = 1.000000
[Sat May 19 22:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 22:28:26 2012] Assessing source extent using major
[Sat May 19 22:28:26 2012] Source does appear to be extended
[Sat May 19 22:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 22:28:40 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Sat May 19 22:28:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 22:28:40 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Sat May 19 22:28:40 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Sat May 19 22:28:40 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.90"
[Sat May 19 23:05:05 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26.ximg exists
[Sat May 19 23:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26.csv
[Sat May 19 23:05:05 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat May 19 23:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26.csv
[Sat May 19 23:05:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 23:05:05 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat May 19 23:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 19 23:05:05 2012] fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat May 19 23:05:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 19 23:05:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 23:48:55 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.145650 pixels away
[Sat May 19 23:48:55 2012] Vigneting correction estimate = 1.000000
[Sat May 19 23:48:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 23:48:55 2012] Assessing source extent using major
[Sat May 19 23:48:55 2012] Source does appear to be extended
[Sat May 19 23:48:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 23:49:09 2012] XMMSAS src. selection expression = ellipse(32530.512238, 11873.976761, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 23:49:09 2012] Writing source region out to fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29_src.reg
[Sat May 19 23:49:09 2012] Extracting stamp from image fullrun_pn_xmm0601211501_pi300-10000_cl_sm2.00.img.gz, (337, 100) - (412, 175)
[Sat May 19 23:49:09 2012] XMMSAS bgd. selection expression = annulus(32530.512238, 11873.976761, 1087.500000, 2175.000000, X, Y)
[Sat May 19 23:49:09 2012] Writing fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29.gif
[Sun May 20 00:07:24 2012] Mean detx,y = (13411.71, -3908.83) 
[Sun May 20 00:07:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 00:07:44 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 00:07:44 2012] Setting source spectrum file to fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun May 20 00:07:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun May 20 00:21:37 2012] Not generating rmf since there are only 85 counts
[Sun May 20 00:21:37 2012] rmf not generated due to insufficient counts
[Sun May 20 00:39:18 2012] Updating aperture counts using extracted products
[Sun May 20 00:39:18 2012] Error reading totcts from fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun May 20 00:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 00:39:19 2012] Using photon index=1.80, rate=0.00236, arf fullrun_pn_xmm0601211501_pi300-10000_pass1_cl_src29.arf
[Sun May 20 00:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 00:39:19 2012] Updating source flux to 1.3e-14
[Sun May 20 00:39:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting