[Sat May 19 20:47:41 2012] Detection parameters:
  Position = (297.1, 372.5) = 0 56 46.99 -72 56 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 9.3
  Background counts = 15.1
  Rate = 0.002 +/- 0.0004

[Sat May 19 20:47:41 2012] Off-axis axis estimate = 5.37'
[Sat May 19 22:04:01 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sat May 19 22:04:01 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sat May 19 22:04:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.114
[Sat May 19 22:04:01 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.11"
[Sat May 19 22:28:20 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10.ximg exists
[Sat May 19 22:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10.csv
[Sat May 19 22:28:20 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May 19 22:28:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10.csv
[Sat May 19 22:28:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 22:28:20 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May 19 22:28:20 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 19 22:28:20 2012] Fit fullrun_mos2_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat May 19 22:28:32 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.172616 pixels away
[Sat May 19 22:28:32 2012] Vigneting correction estimate = 1.000000
[Sat May 19 22:28:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 22:28:32 2012] Assessing source extent using major
[Sat May 19 22:28:32 2012] Source does appear to be extended
[Sat May 19 22:28:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 23:24:50 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sat May 19 23:24:50 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sat May 19 23:24:50 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.114
[Sat May 19 23:24:50 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.11"
[Sat May 19 23:48:48 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 19 23:48:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10.csv
[Sat May 19 23:48:48 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 19 23:48:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10.csv
[Sat May 19 23:48:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 23:48:49 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 19 23:48:49 2012] fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 19 23:48:49 2012] Fit fullrun_mos2_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat May 19 23:49:01 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.172616 pixels away
[Sat May 19 23:49:01 2012] Vigneting correction estimate = 1.000000
[Sat May 19 23:49:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 23:49:01 2012] Assessing source extent using major
[Sat May 19 23:49:01 2012] Source does appear to be extended
[Sat May 19 23:49:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 00:27:26 2012] XMMSAS src. selection expression = ellipse(25798.627045, 32355.691833, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 00:27:26 2012] Writing source region out to fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9_src.reg
[Sun May 20 00:27:26 2012] Extracting stamp from image fullrun_mos2_xmm0601211501_pi300-10000_cl_sm2.00.img.gz, (260, 335) - (335, 410)
[Sun May 20 00:27:26 2012] XMMSAS bgd. selection expression = annulus(25798.627045, 32355.691833, 1087.500000, 2175.000000, X, Y) && !ellipse(23480.648407, 29588.068054, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 00:27:26 2012] Writing fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9.gif
[Sun May 20 00:29:38 2012] Mean detx,y = (7570.99, -1283.29) 
[Sun May 20 00:29:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 00:29:52 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 00:29:53 2012] Setting source spectrum file to fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May 20 00:29:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun May 20 00:33:36 2012] Not generating rmf since there are only 44 counts
[Sun May 20 00:33:36 2012] rmf not generated due to insufficient counts
[Sun May 20 00:39:19 2012] Updating aperture counts using extracted products
[Sun May 20 00:39:19 2012] Error reading totcts from fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May 20 00:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 00:39:19 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9.arf
[Sun May 20 00:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 00:39:19 2012] Updating source flux to 2.8e-14
[Sun May 20 00:39:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 20 00:39:32 2012] xmm0601211501/analysis//spectral/fullrun_mos2_xmm0601211501_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete