[Sat May 19 20:47:19 2012] Detection parameters:
  Position = (302.5, 122.7) = 0 56 41.62 -73 14 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 9.6
  Background counts = 14.2
  Rate = 0.001 +/- 0.0003

[Sat May 19 20:47:20 2012] Off-axis axis estimate = 12.75'
[Sat May 19 21:36:50 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Sat May 19 21:36:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 19 21:36:50 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Sat May 19 21:36:50 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.033
[Sat May 19 21:36:50 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.80"
[Sat May 19 22:04:01 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 19 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15.csv
[Sat May 19 22:04:01 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 19 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15.csv
[Sat May 19 22:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 22:04:01 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 19 22:04:01 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 19 22:04:01 2012] Fit fullrun_mos1_xmm0601211501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat May 19 22:28:29 2012] Spatial fit model total counts = 233.290000, observed total counts = 233.000000
[Sat May 19 22:28:29 2012] Offset between fit and detection position for source 5 = 0.220280 pixels
[Sat May 19 22:28:29 2012] 233.004700 total counts/ 204.125000 bgd. counts: snr = 2.021364
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.220280 pixels
  Position = (302.7, 122.7) = 0 56 41.41 -73 14 54.2
  Extent = 3.6 (3.2-4.8)", rotation angle = 0
  Source counts = 28.9 +/- 15.3
  Background counts = 204.1
  Rate = 0.0008 +/- 0.0004
[Sat May 19 22:28:29 2012] Vigneting correction estimate = 1.000000
[Sat May 19 22:28:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 22:28:29 2012] Assessing source extent using major axis lower bound
[Sat May 19 22:28:29 2012] Source does appear to be extended
[Sat May 19 22:28:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 23:05:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 23:05:05 2012] Initial guess for spatial extent in simple fitting = 3.59"
[Sat May 19 23:05:05 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.280
[Sat May 19 23:05:05 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 3.59"
[Sat May 19 23:24:50 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 19 23:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13.csv
[Sat May 19 23:24:50 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 19 23:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13.csv
[Sat May 19 23:24:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 23:24:50 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 19 23:24:50 2012] fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 19 23:24:50 2012] Fit fullrun_mos1_xmm0601211501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 19 23:48:58 2012] Spatial fit model total counts = 178.080000, observed total counts = 178.000000
[Sat May 19 23:48:58 2012] Offset between fit and detection position for source 5 = 0.014549 pixels
[Sat May 19 23:48:58 2012] 181.030700 total counts/ 151.115000 bgd. counts: snr = 2.433579
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.014549 pixels
  Position = (302.7, 122.7) = 0 56 41.42 -73 14 54.3
  Extent = 3.7 (2.7-4.9)", rotation angle = 0
  Source counts = 29.9 +/- 13.5
  Background counts = 151.1
  Rate = 0.0008 +/- 0.0004
[Sat May 19 23:48:58 2012] Vigneting correction estimate = 1.000000
[Sat May 19 23:48:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 23:48:58 2012] Assessing source extent using major axis lower bound
[Sat May 19 23:48:58 2012] Source does appear to be extended
[Sat May 19 23:48:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 00:21:53 2012] XMMSAS src. selection expression = ellipse(26283.157000, 10622.206600, 220.574406, 220.574406, 0.000000, X, Y)
[Sun May 20 00:21:53 2012] Writing source region out to fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5_src.reg
[Sun May 20 00:21:53 2012] Extracting stamp from image fullrun_mos1_xmm0601211501_pi300-10000_cl_sm2.00.img.gz, (290, 110) - (315, 135)
[Sun May 20 00:21:53 2012] XMMSAS bgd. selection expression = annulus(26283.157000, 10622.206600, 367.624011, 735.248021, X, Y)
[Sun May 20 00:21:53 2012] Writing fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5.gif
[Sun May 20 00:25:23 2012] Mean detx,y = (-2313.72, 13919.10) 
[Sun May 20 00:25:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 00:25:32 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 00:25:32 2012] Setting source spectrum file to fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 00:25:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 20 00:27:08 2012] Not generating rmf since there are only 29 counts
[Sun May 20 00:27:08 2012] rmf not generated due to insufficient counts
[Sun May 20 00:39:19 2012] Updating aperture counts using extracted products
[Sun May 20 00:39:19 2012] Error reading totcts from fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 00:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 00:39:19 2012] Using photon index=1.80, rate=0.000795, arf fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5.arf
[Sun May 20 00:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 00:39:19 2012] Updating source flux to 2.5e-14
[Sun May 20 00:39:21 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 20 00:39:22 2012] xmm0601211501/analysis//spectral/fullrun_mos1_xmm0601211501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete