[Tue Jul 24 08:42:54 2012] Detection parameters:
  Position = (213.7, 316.2) = 0 48 14.21 -73 22 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8375.2 +/- 109.9
  Background counts = 14.6
  Rate = 0.4 +/- 0.005

[Tue Jul 24 08:42:54 2012] Off-axis axis estimate = 6.28'
[Tue Jul 24 10:19:28 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 10:19:28 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Jul 24 10:19:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Tue Jul 24 10:19:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.57"
[Tue Jul 24 10:52:09 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 10:52:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 10:52:09 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 10:52:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 10:52:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 10:52:10 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 10:52:10 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 10:52:10 2012] Fit fullrun_mos2_xmm0601211301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 10:52:32 2012] Spatial fit model total counts = 8025.250000, observed total counts = 8021.000000
[Tue Jul 24 10:52:32 2012] Offset between fit and detection position for source 2 = 0.198491 pixels
[Tue Jul 24 10:52:32 2012] 8064.980000 total counts/ 1736.860000 bgd. counts: snr = 151.842134
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.198491 pixels
  Position = (213.7, 316.4) = 0 48 14.25 -73 22 4.6
  Extent = 6.2 (6.1-6.3)", rotation angle = 0
  Source counts = 6328.1 +/- 89.8
  Background counts = 1736.9
  Rate = 0.2 +/- 0.003
[Tue Jul 24 10:52:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 10:52:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 10:52:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 10:52:32 2012] Source does appear to be extended
[Tue Jul 24 10:52:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 12:18:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 12:18:05 2012] Initial guess for spatial extent in simple fitting = 6.21"
[Tue Jul 24 12:18:05 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.078
[Tue Jul 24 12:18:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.21"
[Tue Jul 24 12:40:18 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 12:40:18 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 12:40:18 2012] Fit fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jul 24 12:40:18 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 12:40:18 2012] fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 12:40:18 2012] Fit fullrun_mos2_xmm0601211301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 24 12:40:30 2012] Spatial fit model total counts = 7856.940000, observed total counts = 7844.000000
[Tue Jul 24 12:40:30 2012] Offset between fit and detection position for source 2 = 0.015628 pixels
[Tue Jul 24 12:40:30 2012] 7905.090000 total counts/ 1732.120000 bgd. counts: snr = 148.321865
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.015628 pixels
  Position = (213.7, 316.4) = 0 48 14.26 -73 22 4.6
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 6173.0 +/- 88.9
  Background counts = 1732.1
  Rate = 0.2 +/- 0.003
[Tue Jul 24 12:40:30 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 12:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 12:40:30 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 12:40:30 2012] Source does appear to be extended
[Tue Jul 24 12:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:49:18 2012] Counts = 6172.970000, rescaling region sizes by 2.000000
[Tue Jul 24 13:49:18 2012] XMMSAS src. selection expression = ellipse(18539.256600, 27477.947600, 719.150421, 719.150421, 0.000000, X, Y)
[Tue Jul 24 13:49:18 2012] Writing source region out to fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 24 13:49:18 2012] Extracting stamp from image fullrun_mos2_xmm0601211301_pi300-10000_cl_sm2.00.img.gz, (172, 275) - (255, 358)
[Tue Jul 24 13:49:18 2012] XMMSAS bgd. selection expression = annulus(18539.256600, 27477.947600, 2397.168069, 4794.336138, X, Y) && !ellipse(18140.690740, 28780.514000, 312.771209, 312.771209, 0.000000, X, Y) && !ellipse(18503.683800, 23482.995800, 966.848028, 619.958418, 70.811001, X, Y) && !ellipse(15178.497910, 23989.333435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16925.922699, 25435.620819, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 13:49:18 2012] Writing fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2.gif
[Tue Jul 24 13:49:22 2012] Mean detx,y = (2457.06, -9054.68) 
[Tue Jul 24 13:49:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 13:50:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 13:50:01 2012] Setting source spectrum file to fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 24 13:50:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul 24 14:04:38 2012] Updating aperture counts using extracted products
[Tue Jul 24 14:04:38 2012] Error reading totcts from fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 24 14:04:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 14:04:39 2012] Using photon index=1.80, rate=0.19, arf fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2.arf
[Tue Jul 24 14:04:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 14:04:39 2012] Updating source flux to 2.9e-12
[Tue Jul 24 14:05:04 2012] Reading fit data from xmm0601211301/analysis//spectral/fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jul 24 14:05:04 2012] Spectral fit parameter nH value = 1.59326e+21
[Tue Jul 24 14:05:04 2012] Spectral fit parameter PhoIndex value = 0.681186
[Tue Jul 24 14:05:04 2012] Failed to get F(0.3-8.0) from xmm0601211301/analysis//spectral/fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 14:05:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 14:05:04 2012] Using Nh = 1.6e+21, photon index=0.68, rate=0.19, arf fullrun_mos2_xmm0601211301_pi300-10000_pass1_cl_src2.arf
[Tue Jul 24 14:05:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 14:05:04 2012] Updating source flux to 5.9e-12