[Sun Jan  1 10:43:29 2012] Detection parameters:
  Position = (438.8, 412.7) = 0 40 27.56 -73 11 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.8 +/- 16.1
  Background counts = 50.0
  Rate = 0.004 +/- 0.0005

[Sun Jan  1 10:43:31 2012] Off-axis axis estimate = 13.12'
[Sun Jan  1 10:48:07 2012] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 10:48:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 10:48:07 2012] Initial guess for spatial extent in simple fitting = 12.99"
[Sun Jan  1 10:48:07 2012] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.802
[Sun Jan  1 10:48:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.99"
[Sun Jan  1 11:39:17 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jan  1 11:39:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 11:39:17 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jan  1 11:39:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 11:39:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:39:17 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jan  1 11:39:17 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jan  1 11:39:17 2012] Fit fullrun_pn_xmm0601211201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jan  1 13:07:44 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.089706 pixels away
[Sun Jan  1 13:07:44 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:07:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:07:44 2012] Assessing source extent using major
[Sun Jan  1 13:07:44 2012] Source does appear to be extended
[Sun Jan  1 13:07:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 13:08:06 2012] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:08:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 13:08:06 2012] Initial guess for spatial extent in simple fitting = 12.99"
[Sun Jan  1 13:08:06 2012] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.802
[Sun Jan  1 13:08:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.99"
[Sun Jan  1 13:56:44 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jan  1 13:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 13:56:44 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jan  1 13:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 13:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:56:44 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jan  1 13:56:44 2012] fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jan  1 13:56:44 2012] Fit fullrun_pn_xmm0601211201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jan  1 15:06:40 2012] Spatial fit model total counts = 717.641000, observed total counts = 716.000000
[Sun Jan  1 15:06:40 2012] Offset between fit and detection position for source 1 = 0.845652 pixels
[Sun Jan  1 15:06:40 2012] 712.085700 total counts/ 630.457000 bgd. counts: snr = 3.250986
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.845652 pixels
  Position = (439.6, 413.0) = 0 40 26.77 -73 11 16.1
  Extent = 5.0 (4.0-6.5)", rotation angle = 0
  Source counts = 81.6 +/- 26.7
  Background counts = 630.5
  Rate = 0.003 +/- 0.0009
[Sun Jan  1 15:06:40 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 15:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 15:06:40 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 15:06:41 2012] Source does appear to be extended
[Sun Jan  1 15:06:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 15:07:02 2012] XMMSAS src. selection expression = ellipse(38192.386600, 35882.956900, 297.886209, 297.886209, 0.000000, X, Y)
[Sun Jan  1 15:07:02 2012] Writing source region out to fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jan  1 15:07:02 2012] Extracting stamp from image fullrun_pn_xmm0601211201_pi300-10000_cl_sm2.00.img.gz, (422, 396) - (457, 430)
[Sun Jan  1 15:07:02 2012] XMMSAS bgd. selection expression = annulus(38192.386600, 35882.956900, 496.477014, 992.954029, X, Y)
[Sun Jan  1 15:07:02 2012] Writing fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1.gif
[Sun Jan  1 15:07:20 2012] Mean detx,y = (-7330.11, -13038.60) 
[Sun Jan  1 15:07:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 15:08:15 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 15:08:16 2012] Setting source spectrum file to fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 15:08:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jan  1 15:30:59 2012] Not generating rmf since there are only 81 counts
[Sun Jan  1 15:30:59 2012] rmf not generated due to insufficient counts
[Sun Jan  1 16:10:16 2012] Updating aperture counts using extracted products
[Sun Jan  1 16:10:17 2012] Error reading totcts from fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 16:10:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 16:10:18 2012] Using photon index=1.80, rate=0.00283, arf fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 16:10:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 16:10:18 2012] Getting flux using calc_pl_flux failed
[Sun Jan  1 16:11:08 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jan  1 16:11:37 2012] xmm0601211201/analysis//spectral/fullrun_pn_xmm0601211201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete