[Wed Feb 22 10:36:34 2012] Detection parameters:
  Position = (454.8, 160.1) = 0 41 45.30 -72 54 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.9 +/- 22.4
  Background counts = 18.5
  Rate = 0.009 +/- 0.0006

[Wed Feb 22 10:36:34 2012] Off-axis axis estimate = 15.14'
[Wed Feb 22 12:15:40 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 12:15:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 12:15:40 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Feb 22 12:15:40 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Feb 22 12:15:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.00"
[Wed Feb 22 13:12:02 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Feb 22 13:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1.csv
[Wed Feb 22 13:12:02 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Feb 22 13:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1.csv
[Wed Feb 22 13:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 13:12:02 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 13:12:02 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 13:12:02 2012] Fit fullrun_mos2_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 13:12:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 18.308242 pixels away
[Wed Feb 22 13:12:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 13:12:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 13:12:24 2012] Assessing source extent using major
[Wed Feb 22 13:12:24 2012] Source does appear to be extended
[Wed Feb 22 13:12:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 14:37:30 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:37:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 14:37:30 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Feb 22 14:37:30 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Feb 22 14:37:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.00"
[Wed Feb 22 15:28:58 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Feb 22 15:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1.csv
[Wed Feb 22 15:28:58 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Feb 22 15:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1.csv
[Wed Feb 22 15:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 15:28:59 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 15:28:59 2012] fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 15:28:59 2012] Fit fullrun_mos2_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 15:29:16 2012] Spatial fit model total counts = 675.302000, observed total counts = 679.000000
[Wed Feb 22 15:29:16 2012] Offset between fit and detection position for source 23 = 0.263394 pixels
[Wed Feb 22 15:29:16 2012] 672.984000 total counts/ 382.409000 bgd. counts: snr = 14.859158
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.263394 pixels
  Position = (454.9, 160.3) = 0 41 45.23 -72 54 33.9
  Extent = 8.8 (7.7-9.7)", rotation angle = 0
  Source counts = 290.6 +/- 25.9
  Background counts = 382.4
  Rate = 0.008 +/- 0.0007
[Wed Feb 22 15:29:16 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:29:16 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 15:29:16 2012] Source does appear to be extended
[Wed Feb 22 15:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:00:18 2012] XMMSAS src. selection expression = ellipse(39528.723400, 13900.361000, 527.181004, 527.181004, 0.000000, X, Y)
[Wed Feb 22 17:00:18 2012] Writing source region out to fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_src.reg
[Wed Feb 22 17:00:18 2012] Extracting stamp from image fullrun_mos2_xmm0601211001_pi300-10000_cl_sm2.00.img.gz, (425, 130) - (485, 191)
[Wed Feb 22 17:00:18 2012] XMMSAS bgd. selection expression = annulus(39528.723400, 13900.361000, 878.635007, 1757.270014, X, Y)
[Wed Feb 22 17:00:18 2012] Writing fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23.gif
[Wed Feb 22 17:00:23 2012] Mean detx,y = (-16267.75, 3313.17) 
[Wed Feb 22 17:00:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 17:00:44 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 17:00:45 2012] Setting source spectrum file to fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Feb 22 17:00:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Feb 22 17:28:46 2012] Updating aperture counts using extracted products
[Wed Feb 22 17:28:46 2012] Error reading totcts from fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Feb 22 17:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 17:28:47 2012] Using photon index=1.80, rate=0.00797, arf fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23.arf
[Wed Feb 22 17:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 17:28:47 2012] Updating source flux to 2.3e-13
[Wed Feb 22 17:30:29 2012] Reading fit data from xmm0601211001/analysis//spectral/fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_pl.csv
[Wed Feb 22 17:30:29 2012] Spectral fit parameter nH value = 1.88461e+21
[Wed Feb 22 17:30:29 2012] Spectral fit parameter PhoIndex value = 1.92229
[Wed Feb 22 17:30:29 2012] Failed to get F(0.3-8.0) from xmm0601211001/analysis//spectral/fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 17:30:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 17:30:29 2012] Using Nh = 1.9e+21, photon index=1.92, rate=0.00797, arf fullrun_mos2_xmm0601211001_pi300-10000_pass1_cl_src23.arf
[Wed Feb 22 17:30:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 17:30:29 2012] Updating source flux to 2.6e-13