[Wed Feb 22 10:35:56 2012] Detection parameters:
  Position = (482.3, 399.0) = 0 41 21.10 -72 37 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.4 +/- 14.8
  Background counts = 18.5
  Rate = 0.003 +/- 0.0004

[Wed Feb 22 10:35:57 2012] Off-axis axis estimate = 15.19'
[Wed Feb 22 11:34:22 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:34:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 11:34:22 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Wed Feb 22 11:34:22 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.009
[Wed Feb 22 11:34:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 14.03"
[Wed Feb 22 12:15:40 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5.ximg exists
[Wed Feb 22 12:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 12:15:40 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Feb 22 12:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 12:15:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:15:40 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Feb 22 12:15:40 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Feb 22 12:15:40 2012] Fit fullrun_mos1_xmm0601211001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Feb 22 13:12:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.496673 pixels away
[Wed Feb 22 13:12:18 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 13:12:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 13:12:18 2012] Assessing source extent using major
[Wed Feb 22 13:12:18 2012] Source does appear to be extended
[Wed Feb 22 13:12:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 14:06:23 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:06:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 14:06:23 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Wed Feb 22 14:06:23 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.009
[Wed Feb 22 14:06:23 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.03"
[Wed Feb 22 14:37:30 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5.ximg exists
[Wed Feb 22 14:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5.csv
[Wed Feb 22 14:37:30 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Feb 22 14:37:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5.csv
[Wed Feb 22 14:37:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 14:37:30 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 22 14:37:30 2012] fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 22 14:37:30 2012] Fit fullrun_mos1_xmm0601211001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Feb 22 15:29:11 2012] Spatial fit model total counts = 343.736000, observed total counts = 344.000000
[Wed Feb 22 15:29:11 2012] Offset between fit and detection position for source 3 = 0.347751 pixels
[Wed Feb 22 15:29:11 2012] 327.032800 total counts/ 250.909000 bgd. counts: snr = 4.805763
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.347751 pixels
  Position = (482.0, 399.0) = 0 41 21.45 -72 37 14.6
  Extent = 5.0 (3.9-7.1)", rotation angle = 0
  Source counts = 76.1 +/- 18.1
  Background counts = 250.9
  Rate = 0.002 +/- 0.0005
[Wed Feb 22 15:29:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:29:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:29:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 15:29:11 2012] Source does appear to be extended
[Wed Feb 22 15:29:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 16:35:34 2012] XMMSAS src. selection expression = ellipse(41882.928600, 34660.529600, 300.152409, 300.152409, 0.000000, X, Y)
[Wed Feb 22 16:35:34 2012] Writing source region out to fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3_src.reg
[Wed Feb 22 16:35:34 2012] Extracting stamp from image fullrun_mos1_xmm0601211001_pi300-10000_cl_sm2.00.img.gz, (465, 382) - (499, 416)
[Wed Feb 22 16:35:34 2012] XMMSAS bgd. selection expression = annulus(41882.928600, 34660.529600, 500.254014, 1000.508029, X, Y)
[Wed Feb 22 16:35:34 2012] Writing fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3.gif
[Wed Feb 22 16:37:18 2012] Mean detx,y = (16730.34, 16.85) 
[Wed Feb 22 16:37:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 16:37:33 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 16:37:33 2012] Setting source spectrum file to fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 16:37:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Feb 22 16:49:38 2012] Not generating rmf since there are only 76 counts
[Wed Feb 22 16:49:38 2012] rmf not generated due to insufficient counts
[Wed Feb 22 17:28:44 2012] Updating aperture counts using extracted products
[Wed Feb 22 17:28:45 2012] Error reading totcts from fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 17:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 17:28:45 2012] Using photon index=1.80, rate=0.00209, arf fullrun_mos1_xmm0601211001_pi300-10000_pass1_cl_src3.arf
[Wed Feb 22 17:28:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 17:28:46 2012] Updating source flux to 7.7e-14
[Wed Feb 22 17:28:50 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting