[Thu May 24 21:21:07 2012] Detection parameters:
  Position = (215.1, 193.2) = 0 51 5.02 -72 23 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.1 +/- 13.5
  Background counts = 53.7
  Rate = 0.002 +/- 0.0004

[Thu May 24 21:21:07 2012] Off-axis axis estimate = 9.73'
[Thu May 24 21:23:54 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:23:54 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Thu May 24 21:23:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Thu May 24 21:23:54 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.30"
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31.csv
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31.csv
[Thu May 24 22:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu May 24 22:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:06:28 2012] Warning, spatial fit 31 centroid is now closest to src. 33
[Thu May 24 23:06:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:28 2012] Assessing source extent using major
[Thu May 24 23:06:28 2012] Source does appear to be extended
[Thu May 24 23:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:06:45 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Thu May 24 23:06:45 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Thu May 24 23:06:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Thu May 24 23:06:45 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 11.30"
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src31.ximg exists
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu May 24 23:46:31 2012] Fit fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src31 appears to have run properly
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu May 24 23:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu May 24 23:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May 24 23:46:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:32:58 2012] Warning, spatial fit 31 centroid is now closest to src. 5
[Fri May 25 00:32:58 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:32:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:32:58 2012] Assessing source extent using major
[Fri May 25 00:32:58 2012] Source does appear to be extended
[Fri May 25 00:32:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:33:14 2012] XMMSAS src. selection expression = ellipse(18661.138336, 16760.300644, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 00:33:14 2012] Writing source region out to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32_src.reg
[Fri May 25 00:33:14 2012] Extracting stamp from image fullrun_pn_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (178, 156) - (253, 231)
[Fri May 25 00:33:14 2012] XMMSAS bgd. selection expression = annulus(18661.138336, 16760.300644, 1087.500000, 2175.000000, X, Y) && !ellipse(19425.902267, 16651.051498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19426.797012, 18734.476883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17948.540040, 16187.003400, 322.352809, 322.352809, 0.000000, X, Y)
[Fri May 25 00:33:14 2012] Writing fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32.gif
[Fri May 25 00:56:01 2012] Mean detx,y = (9136.19, 7316.48) 
[Fri May 25 00:56:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 00:56:24 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 00:56:25 2012] Setting source spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri May 25 00:56:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri May 25 01:23:37 2012] Not generating rmf since there are only 60 counts
[Fri May 25 01:23:37 2012] rmf not generated due to insufficient counts
[Fri May 25 01:58:22 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:22 2012] Error reading totcts from fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri May 25 01:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:23 2012] Using photon index=1.80, rate=0.00162, arf fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src32.arf
[Fri May 25 01:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:23 2012] Updating source flux to 7.3e-15
[Fri May 25 01:59:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting