[Thu May 24 21:21:07 2012] Detection parameters:
  Position = (392.8, 255.0) = 0 48 14.93 -72 19 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.6 +/- 20.1
  Background counts = 46.9
  Rate = 0.01 +/- 0.0009

[Thu May 24 21:21:07 2012] Off-axis axis estimate = 7.53'
[Thu May 24 21:23:54 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:23:54 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu May 24 21:23:54 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Thu May 24 21:23:54 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.20"
[Thu May 24 22:09:59 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25.csv
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25.csv
[Thu May 24 22:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 24 22:10:00 2012] Fit fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu May 24 23:06:28 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 13.451035 pixels away
[Thu May 24 23:06:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:28 2012] Assessing source extent using major
[Thu May 24 23:06:28 2012] Source does appear to be extended
[Thu May 24 23:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:06:45 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu May 24 23:06:45 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu May 24 23:06:45 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Thu May 24 23:06:45 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.20"
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 24 23:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25.csv
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 24 23:46:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25.csv
[Thu May 24 23:46:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 24 23:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 24 23:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 24 23:46:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:32:58 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 27.437356 pixels away
[Fri May 25 00:32:58 2012] Source 26 is offset by -3.343049 and -5.132981 pixels which is larger than
2 X fitted extent = 1.560276 x 1.560276, not incorporating fit results
[Fri May 25 00:32:58 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:32:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:32:58 2012] Assessing source extent using major
[Fri May 25 00:32:58 2012] Source does appear to be extended
[Fri May 25 00:32:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:33:14 2012] XMMSAS src. selection expression = ellipse(34127.424744, 22135.586670, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 00:33:14 2012] Writing source region out to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26_src.reg
[Fri May 25 00:33:14 2012] Extracting stamp from image fullrun_pn_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (355, 217) - (430, 292)
[Fri May 25 00:33:14 2012] XMMSAS bgd. selection expression = annulus(34127.424744, 22135.586670, 1087.500000, 2175.000000, X, Y) && !ellipse(35543.900260, 24620.039400, 493.343214, 251.946407, 110.179488, X, Y) && !ellipse(31096.522949, 22308.235260, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 00:33:14 2012] Writing fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26.gif
[Fri May 25 00:52:10 2012] Mean detx,y = (1503.77, -7177.09) 
[Fri May 25 00:52:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 00:52:29 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 00:52:29 2012] Setting source spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 25 00:52:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 25 01:17:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 25 01:17:17 2012] rmf not generated due to insufficient counts
[Fri May 25 01:58:22 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:22 2012] Error reading totcts from fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 25 01:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:23 2012] Using photon index=1.80, rate=0.00955, arf fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src26.arf
[Fri May 25 01:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:23 2012] Updating source flux to 3.3e-14
[Fri May 25 01:59:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting