[Thu May 24 21:21:07 2012] Detection parameters:
  Position = (222.8, 333.8) = 0 50 56.93 -72 13 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4048.8 +/- 77.3
  Background counts = 50.8
  Rate = 0.2 +/- 0.004

[Thu May 24 21:21:07 2012] Off-axis axis estimate = 6.05'
[Thu May 24 21:23:54 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:23:54 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Thu May 24 21:23:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.874
[Thu May 24 21:23:54 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.46"
[Thu May 24 22:09:59 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 22:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2.csv
[Thu May 24 22:09:59 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 22:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2.csv
[Thu May 24 22:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 22:10:00 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 22:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 24 22:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:06:28 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.051486 pixels away
[Thu May 24 23:06:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:28 2012] Assessing source extent using major
[Thu May 24 23:06:28 2012] Source does appear to be extended
[Thu May 24 23:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:06:45 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Thu May 24 23:06:45 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Thu May 24 23:06:45 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.874
[Thu May 24 23:06:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.46"
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 24 23:46:31 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 24 23:46:31 2012] Fit fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 24 23:46:32 2012] fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 24 23:46:32 2012] Fit fullrun_pn_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 25 00:32:58 2012] Spatial fit model total counts = 4247.620000, observed total counts = 4024.000000
[Fri May 25 00:32:58 2012] Offset between fit and detection position for source 2 = 0.243000 pixels
[Fri May 25 00:32:58 2012] 4273.090000 total counts/ 1309.000000 bgd. counts: snr = 81.925964
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.243000 pixels
  Position = (222.7, 333.6) = 0 50 57.00 -72 13 34.9
  Extent = 6.9 (6.6-7.1)" x 5.0 (4.8-5.2)", rotation angle = 126 (122-131) degrees
  Source counts = 2964.1 +/- 65.4
  Background counts = 1309.0
  Rate = 0.08 +/- 0.002
[Fri May 25 00:32:58 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:32:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:32:58 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:32:58 2012] Source does appear to be extended
[Fri May 25 00:32:58 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Fri May 25 00:33:14 2012] Counts = 2964.090000, rescaling region sizes by 2.000000
[Fri May 25 00:33:14 2012] XMMSAS src. selection expression = ellipse(19328.392600, 28970.350400, 823.057224, 597.933617, 125.948577, X, Y)
[Fri May 25 00:33:14 2012] Writing source region out to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2_src.reg
[Fri May 25 00:33:14 2012] Extracting stamp from image fullrun_pn_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (175, 286) - (270, 381)
[Fri May 25 00:33:14 2012] XMMSAS bgd. selection expression = annulus(19328.392600, 28970.350400, 2743.524079, 5487.048158, X, Y) && !ellipse(17529.578580, 25016.476200, 539.449616, 409.204812, 98.469123, X, Y) && !ellipse(22630.900970, 34320.299347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22766.435800, 31381.821000, 464.712013, 464.712013, 0.000000, X, Y) && !ellipse(17243.315521, 29603.807068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13741.820600, 24156.806800, 361.032810, 361.032810, 0.000000, X, Y) && !ellipse(23699.411560, 23340.744600, 547.350416, 547.350416, 0.000000, X, Y)
[Fri May 25 00:33:14 2012] Writing fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2.gif
[Fri May 25 00:34:48 2012] Mean detx,y = (-3133.07, 8416.00) 
[Fri May 25 00:34:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 00:35:52 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 00:35:52 2012] Setting source spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 00:35:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 25 01:58:22 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:22 2012] Error reading totcts from fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 25 01:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:22 2012] Using photon index=1.80, rate=0.08, arf fullrun_pn_xmm0601210701_pi300-10000_pass1_cl_src2.arf
[Fri May 25 01:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:22 2012] Updating source flux to 3.2e-13