[Thu May 24 21:21:49 2012] Detection parameters:
  Position = (293.9, 314.3) = 0 49 49.36 -72 14 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 13.7
  Background counts = 15.4
  Rate = 0.003 +/- 0.0004

[Thu May 24 21:21:50 2012] Off-axis axis estimate = 1.19'
[Thu May 24 22:29:45 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu May 24 22:29:45 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu May 24 22:29:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Thu May 24 22:29:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.03"
[Thu May 24 23:06:20 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 24 23:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10.csv
[Thu May 24 23:06:20 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 24 23:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10.csv
[Thu May 24 23:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:06:21 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 24 23:06:21 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 24 23:06:21 2012] Fit fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 24 23:06:36 2012] Source 16 is offset by -6.537568 and -7.196229 pixels which is larger than
2 X fitted extent = 0.807490 x 0.807490, not incorporating fit results
[Thu May 24 23:06:36 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:36 2012] Assessing source extent using major
[Thu May 24 23:06:36 2012] Source does appear to be extended
[Thu May 24 23:06:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:05:16 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri May 25 00:05:16 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Fri May 25 00:05:16 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Fri May 25 00:05:16 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.03"
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 25 00:32:52 2012] Fit fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 25 00:32:52 2012] Fit fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 25 00:33:05 2012] Source 16 is offset by -6.537568 and -7.196229 pixels which is larger than
2 X fitted extent = 0.807490 x 0.807490, not incorporating fit results
[Fri May 25 00:33:05 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:33:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:33:05 2012] Assessing source extent using major
[Fri May 25 00:33:05 2012] Source does appear to be extended
[Fri May 25 00:33:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:36:23 2012] XMMSAS src. selection expression = ellipse(25522.745605, 27292.442108, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 01:36:23 2012] Writing source region out to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16_src.reg
[Fri May 25 01:36:23 2012] Extracting stamp from image fullrun_mos2_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (256, 277) - (331, 352)
[Fri May 25 01:36:23 2012] XMMSAS bgd. selection expression = annulus(25522.745605, 27292.442108, 1087.500000, 2175.000000, X, Y) && !ellipse(26933.020172, 29471.209595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25420.096600, 29045.594000, 726.239221, 726.239221, 0.000000, X, Y)
[Fri May 25 01:36:23 2012] Writing fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16.gif
[Fri May 25 01:41:04 2012] Mean detx,y = (2485.05, -2238.03) 
[Fri May 25 01:41:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 01:41:12 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 01:41:12 2012] Setting source spectrum file to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May 25 01:41:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri May 25 01:56:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 25 01:56:07 2012] rmf not generated due to insufficient counts
[Fri May 25 01:58:23 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:23 2012] Error reading totcts from fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May 25 01:58:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:24 2012] Using photon index=1.80, rate=0.00292, arf fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src16.arf
[Fri May 25 01:58:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:24 2012] Updating source flux to 3e-14
[Fri May 25 01:58:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting