[Thu May 24 21:21:49 2012] Detection parameters:
  Position = (342.6, 401.5) = 0 49 3.32 -72 8 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.0 +/- 9.1
  Background counts = 14.7
  Rate = 0.001 +/- 0.0002

[Thu May 24 21:21:50 2012] Off-axis axis estimate = 8.13'
[Thu May 24 22:29:45 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu May 24 22:29:45 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Thu May 24 22:29:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Thu May 24 22:29:45 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.49"
[Thu May 24 23:06:20 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25.ximg exists
[Thu May 24 23:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25.csv
[Thu May 24 23:06:20 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May 24 23:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25.csv
[Thu May 24 23:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 23:06:21 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May 24 23:06:21 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 24 23:06:21 2012] Fit fullrun_mos2_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu May 24 23:06:36 2012] Source 11 is offset by -9.015461 and -0.792995 pixels which is larger than
2 X fitted extent = 1.236679 x 1.236679, not incorporating fit results
[Thu May 24 23:06:36 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:36 2012] Assessing source extent using major
[Thu May 24 23:06:36 2012] Source does appear to be extended
[Thu May 24 23:06:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 00:05:16 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri May 25 00:05:16 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Fri May 25 00:05:16 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.737
[Fri May 25 00:05:16 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.49"
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 25 00:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23.csv
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 25 00:32:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23.csv
[Fri May 25 00:32:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 25 00:32:52 2012] fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 25 00:32:52 2012] Fit fullrun_mos2_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri May 25 00:33:05 2012] Spatial fit model total counts = 180.999000, observed total counts = 181.000000
[Fri May 25 00:33:05 2012] Offset between fit and detection position for source 11 = 0.142556 pixels
[Fri May 25 00:33:05 2012] 179.249900 total counts/ 153.683000 bgd. counts: snr = 2.062363
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.142556 pixels
  Position = (342.5, 401.4) = 0 49 3.41 -72 8 40.2
  Extent = 3.0 (2.6-4.3)", rotation angle = 0
  Source counts = 25.6 +/- 13.4
  Background counts = 153.7
  Rate = 0.0007 +/- 0.0003
[Fri May 25 00:33:05 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:33:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:33:05 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:33:05 2012] Source does appear to be extended
[Fri May 25 00:33:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:36:23 2012] XMMSAS src. selection expression = ellipse(29747.705400, 34876.031000, 181.371605, 181.371605, 0.000000, X, Y)
[Fri May 25 01:36:23 2012] Writing source region out to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11_src.reg
[Fri May 25 01:36:23 2012] Extracting stamp from image fullrun_mos2_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (332, 391) - (353, 412)
[Fri May 25 01:36:23 2012] XMMSAS bgd. selection expression = annulus(29747.705400, 34876.031000, 302.286009, 604.572017, X, Y)
[Fri May 25 01:36:23 2012] Writing fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11.gif
[Fri May 25 01:43:42 2012] Mean detx,y = (10616.97, 810.88) 
[Fri May 25 01:43:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 01:43:49 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 01:43:49 2012] Setting source spectrum file to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 25 01:43:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 25 01:57:12 2012] Not generating rmf since there are only 25 counts
[Fri May 25 01:57:12 2012] rmf not generated due to insufficient counts
[Fri May 25 01:58:23 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:23 2012] Error reading totcts from fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 25 01:58:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:24 2012] Using photon index=1.80, rate=0.000662, arf fullrun_mos2_xmm0601210701_pi300-10000_pass1_cl_src11.arf
[Fri May 25 01:58:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:24 2012] Updating source flux to 2.4e-14
[Fri May 25 01:58:37 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Fri May 25 01:58:37 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting