[Thu May 24 21:21:27 2012] Detection parameters:
  Position = (347.8, 343.3) = 0 48 58.18 -72 12 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 501.9 +/- 27.6
  Background counts = 17.2
  Rate = 0.02 +/- 0.001

[Thu May 24 21:21:27 2012] Off-axis axis estimate = 4.84'
[Thu May 24 22:10:00 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Thu May 24 22:10:00 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Thu May 24 22:10:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Thu May 24 22:10:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.85"
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 22:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1.csv
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 22:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1.csv
[Thu May 24 22:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 22:29:45 2012] Fit fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 23:06:31 2012] Spatial fit model total counts = 570.918000, observed total counts = 568.000000
[Thu May 24 23:06:31 2012] Offset between fit and detection position for source 4 = 0.268654 pixels
[Thu May 24 23:06:31 2012] 570.634000 total counts/ 209.646000 bgd. counts: snr = 24.931561
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.268654 pixels
  Position = (347.6, 343.5) = 0 48 58.35 -72 12 52.1
  Extent = 5.5 (5.0-6.0)", rotation angle = 0
  Source counts = 361.0 +/- 23.9
  Background counts = 209.6
  Rate = 0.009 +/- 0.0006
[Thu May 24 23:06:31 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:31 2012] Assessing source extent using major axis lower bound
[Thu May 24 23:06:31 2012] Source does appear to be extended
[Thu May 24 23:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:46:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 23:46:32 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Thu May 24 23:46:32 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.730
[Thu May 24 23:46:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Fri May 25 00:05:15 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 00:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1.csv
[Fri May 25 00:05:15 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 00:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1.csv
[Fri May 25 00:05:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:05:16 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 00:05:16 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 00:05:16 2012] Fit fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 00:33:01 2012] Spatial fit model total counts = 570.815000, observed total counts = 568.000000
[Fri May 25 00:33:01 2012] Offset between fit and detection position for source 4 = 0.000065 pixels
[Fri May 25 00:33:01 2012] 570.531000 total counts/ 209.672000 bgd. counts: snr = 24.921107
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000065 pixels
  Position = (347.6, 343.5) = 0 48 58.35 -72 12 52.1
  Extent = 5.5 (5.0-6.0)", rotation angle = 0
  Source counts = 360.9 +/- 23.9
  Background counts = 209.7
  Rate = 0.009 +/- 0.0006
[Fri May 25 00:33:01 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:33:01 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:33:01 2012] Source does appear to be extended
[Fri May 25 00:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:24:22 2012] XMMSAS src. selection expression = ellipse(30196.383800, 29835.871600, 327.772809, 327.772809, 0.000000, X, Y)
[Fri May 25 01:24:22 2012] Writing source region out to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_src.reg
[Fri May 25 01:24:22 2012] Extracting stamp from image fullrun_mos1_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (329, 325) - (366, 362)
[Fri May 25 01:24:22 2012] XMMSAS bgd. selection expression = annulus(30196.383800, 29835.871600, 546.288016, 1092.576031, X, Y)
[Fri May 25 01:24:22 2012] Writing fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4.gif
[Fri May 25 01:24:25 2012] Mean detx,y = (2254.07, -5869.16) 
[Fri May 25 01:24:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 01:24:35 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 01:24:35 2012] Setting source spectrum file to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 01:24:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 25 01:58:23 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:23 2012] Error reading totcts from fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 01:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:23 2012] Using photon index=1.80, rate=0.00935, arf fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4.arf
[Fri May 25 01:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:23 2012] Updating source flux to 1.4e-13
[Fri May 25 01:58:37 2012] Reading fit data from xmm0601210701/analysis//spectral/fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_pl.csv
[Fri May 25 01:58:37 2012] Spectral fit parameter nH value = 5.11075e+21
[Fri May 25 01:58:37 2012] Spectral fit parameter PhoIndex value = 1.5995
[Fri May 25 01:58:37 2012] Failed to get F(0.3-8.0) from xmm0601210701/analysis//spectral/fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri May 25 01:58:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:37 2012] Using Nh = 5.1e+21, photon index=1.60, rate=0.00935, arf fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src4.arf
[Fri May 25 01:58:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:37 2012] Updating source flux to 2.2e-13