[Thu May 24 21:21:27 2012] Detection parameters:
  Position = (223.5, 191.8) = 0 50 56.88 -72 23 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.9 +/- 13.2
  Background counts = 15.0
  Rate = 0.002 +/- 0.0003

[Thu May 24 21:21:27 2012] Off-axis axis estimate = 9.45'
[Thu May 24 22:10:00 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 24 22:10:00 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 24 22:10:00 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.119
[Thu May 24 22:10:00 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.15"
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 24 22:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8.csv
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 24 22:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8.csv
[Thu May 24 22:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 24 22:29:45 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 24 22:29:45 2012] Fit fullrun_mos1_xmm0601210701_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 24 23:06:31 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.104482 pixels away
[Thu May 24 23:06:31 2012] Vigneting correction estimate = 1.000000
[Thu May 24 23:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 23:06:31 2012] Assessing source extent using major
[Thu May 24 23:06:31 2012] Source does appear to be extended
[Thu May 24 23:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 23:46:32 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 24 23:46:32 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 24 23:46:32 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.119
[Thu May 24 23:46:32 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.15"
[Fri May 25 00:05:15 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 25 00:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8.csv
[Fri May 25 00:05:15 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 25 00:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8.csv
[Fri May 25 00:05:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 00:05:16 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 25 00:05:16 2012] fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 25 00:05:16 2012] Fit fullrun_mos1_xmm0601210701_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri May 25 00:33:01 2012] Spatial fit model total counts = 256.439000, observed total counts = 257.000000
[Fri May 25 00:33:01 2012] Offset between fit and detection position for source 3 = 0.488373 pixels
[Fri May 25 00:33:01 2012] 256.100200 total counts/ 196.629000 bgd. counts: snr = 4.241143
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.488373 pixels
  Position = (224.0, 191.6) = 0 50 56.45 -72 23 52.4
  Extent = 7.2 (4.4-11.2)", rotation angle = 0
  Source counts = 59.5 +/- 16.0
  Background counts = 196.6
  Rate = 0.002 +/- 0.0004
[Fri May 25 00:33:01 2012] Vigneting correction estimate = 1.000000
[Fri May 25 00:33:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 00:33:01 2012] Assessing source extent using major axis lower bound
[Fri May 25 00:33:01 2012] Source does appear to be extended
[Fri May 25 00:33:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:24:22 2012] XMMSAS src. selection expression = ellipse(19439.830200, 16620.467800, 433.060812, 433.060812, 0.000000, X, Y)
[Fri May 25 01:24:22 2012] Writing source region out to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3_src.reg
[Fri May 25 01:24:22 2012] Extracting stamp from image fullrun_mos1_xmm0601210701_pi300-10000_cl_sm2.00.img.gz, (199, 167) - (249, 216)
[Fri May 25 01:24:22 2012] XMMSAS bgd. selection expression = annulus(19439.830200, 16620.467800, 721.768021, 1443.536042, X, Y) && !ellipse(19383.217361, 18639.941910, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 01:24:22 2012] Writing fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3.gif
[Fri May 25 01:25:49 2012] Mean detx,y = (-6454.93, 8775.29) 
[Fri May 25 01:25:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 01:25:59 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 01:25:59 2012] Setting source spectrum file to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 01:25:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 25 01:35:27 2012] Not generating rmf since there are only 59 counts
[Fri May 25 01:35:27 2012] rmf not generated due to insufficient counts
[Fri May 25 01:58:23 2012] Updating aperture counts using extracted products
[Fri May 25 01:58:23 2012] Error reading totcts from fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 25 01:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 01:58:23 2012] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0601210701_pi300-10000_pass1_cl_src3.arf
[Fri May 25 01:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 01:58:23 2012] Updating source flux to 3.2e-14
[Fri May 25 01:58:25 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting