[Wed Jul 25 17:12:38 2012] Detection parameters:
  Position = (415.1, 130.6) = 0 53 45.25 -72 12 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.0 +/- 12.4
  Background counts = 16.2
  Rate = 0.002 +/- 0.0003

[Wed Jul 25 17:12:38 2012] Off-axis axis estimate = 14.82'
[Wed Jul 25 17:55:07 2012] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 17:55:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 17:55:07 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Wed Jul 25 17:55:07 2012] source mask rpix=3.2, npix_max = 54, mask sum = 51, frac = 0.941
[Wed Jul 25 17:55:07 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 13.84"
[Wed Jul 25 18:22:07 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jul 25 18:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14.csv
[Wed Jul 25 18:22:07 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jul 25 18:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14.csv
[Wed Jul 25 18:22:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:07 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jul 25 18:22:07 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jul 25 18:22:07 2012] Fit fullrun_mos1_xmm0601210601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jul 25 18:48:36 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.174342 pixels away
[Wed Jul 25 18:48:36 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:48:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:48:36 2012] Assessing source extent using major
[Wed Jul 25 18:48:36 2012] Source does appear to be extended
[Wed Jul 25 18:48:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 19:21:25 2012] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:21:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 19:21:25 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Wed Jul 25 19:21:25 2012] source mask rpix=3.2, npix_max = 54, mask sum = 51, frac = 0.941
[Wed Jul 25 19:21:25 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.84"
[Wed Jul 25 19:44:49 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14.ximg exists
[Wed Jul 25 19:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14.csv
[Wed Jul 25 19:44:49 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Jul 25 19:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14.csv
[Wed Jul 25 19:44:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:44:49 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Jul 25 19:44:49 2012] fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Jul 25 19:44:49 2012] Fit fullrun_mos1_xmm0601210601_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Jul 25 20:09:38 2012] Spatial fit model total counts = 292.997000, observed total counts = 282.000000
[Wed Jul 25 20:09:38 2012] Offset between fit and detection position for source 21 = 1.223878 pixels
[Wed Jul 25 20:09:38 2012] 292.640700 total counts/ 218.210000 bgd. counts: snr = 5.038657
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.223878 pixels
  Position = (413.9, 130.9) = 0 53 46.39 -72 12 36.2
  Extent = 11.8 (4.5-18.0)", rotation angle = 0
  Source counts = 74.4 +/- 17.1
  Background counts = 218.2
  Rate = 0.002 +/- 0.0005
[Wed Jul 25 20:09:38 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:09:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:09:38 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 20:09:38 2012] Source does appear to be extended
[Wed Jul 25 20:09:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:40:41 2012] XMMSAS src. selection expression = ellipse(35960.635000, 11342.177000, 709.758020, 709.758020, 0.000000, X, Y)
[Wed Jul 25 20:40:41 2012] Writing source region out to fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21_src.reg
[Wed Jul 25 20:40:41 2012] Extracting stamp from image fullrun_mos1_xmm0601210601_pi300-10000_cl_sm2.00.img.gz, (373, 90) - (455, 172)
[Wed Jul 25 20:40:41 2012] XMMSAS bgd. selection expression = annulus(35960.635000, 11342.177000, 1182.930034, 2365.860068, X, Y)
[Wed Jul 25 20:40:41 2012] Writing fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21.gif
[Wed Jul 25 20:45:15 2012] Mean detx,y = (10961.03, 11209.12) 
[Wed Jul 25 20:45:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 20:45:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 20:45:35 2012] Setting source spectrum file to fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jul 25 20:45:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jul 25 20:51:39 2012] Not generating rmf since there are only 74 counts
[Wed Jul 25 20:51:39 2012] rmf not generated due to insufficient counts
[Wed Jul 25 21:06:40 2012] Updating aperture counts using extracted products
[Wed Jul 25 21:06:40 2012] Error reading totcts from fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jul 25 21:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 21:06:40 2012] Using photon index=1.80, rate=0.00196, arf fullrun_mos1_xmm0601210601_pi300-10000_pass1_cl_src21.arf
[Wed Jul 25 21:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 21:06:40 2012] Updating source flux to 4.9e-14
[Wed Jul 25 21:06:42 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting