[Fri May 24 22:53:02 2013] Detection parameters:
  Position = (285.7, 154.7) = 1 3 26.21 -71 45 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.0 +/- 8.5
  Background counts = 15.8
  Rate = 0.0009 +/- 0.0002

[Fri May 24 22:53:02 2013] Off-axis axis estimate = 10.47'
[Sat May 25 00:03:13 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:03:13 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Sat May 25 00:03:13 2013] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.766
[Sat May 25 00:03:13 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.66"
[Sat May 25 00:37:11 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22.ximg exists
[Sat May 25 00:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22.csv
[Sat May 25 00:37:11 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat May 25 00:37:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22.csv
[Sat May 25 00:37:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:37:11 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat May 25 00:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 25 00:37:12 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat May 25 00:37:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 25 00:37:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:37:43 2013] Source 19 is offset by -4.458631 and -7.909180 pixels which is larger than
2 X fitted extent = 1.357439 x 1.357439, not incorporating fit results
[Sat May 25 00:37:43 2013] Spatial fit model total counts = 260.113000, observed total counts = 234.000000
[Sat May 25 00:37:43 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:37:43 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:37:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:37:43 2013] Assessing source extent using major
[Sat May 25 00:37:43 2013] Source does appear to be extended
[Sat May 25 00:37:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:37:43 2013] Source is confused with source 18
[Sat May 25 02:20:38 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Sat May 25 02:20:38 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Sat May 25 02:20:38 2013] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.766
[Sat May 25 02:20:38 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 11.66"
[Sat May 25 02:59:29 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20.ximg exists
[Sat May 25 02:59:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20.csv
[Sat May 25 02:59:29 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat May 25 02:59:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20.csv
[Sat May 25 02:59:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 02:59:29 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat May 25 02:59:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat May 25 02:59:29 2013] fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat May 25 02:59:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat May 25 02:59:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601210401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 02:59:47 2013] Source 19 is offset by -4.520263 and 8.872268 pixels which is larger than
2 X fitted extent = 1.340235 x 1.340235, not incorporating fit results
[Sat May 25 02:59:48 2013] Spatial fit model total counts = 284.470000, observed total counts = 234.000000
[Sat May 25 02:59:48 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 02:59:48 2013] Vigneting correction estimate = 1.000000
[Sat May 25 02:59:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 02:59:48 2013] Assessing source extent using major
[Sat May 25 02:59:48 2013] Source does appear to be extended
[Sat May 25 02:59:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 04:12:39 2013] XMMSAS src. selection expression = ellipse(24807.539124, 13406.085312, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 04:12:39 2013] Writing source region out to fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_src.reg
[Sat May 25 04:12:39 2013] Extracting stamp from image fullrun_mos2_xmm0601210401_pi300-10000_cl_sm2.00.img.gz, (248, 117) - (323, 192)
[Sat May 25 04:12:39 2013] XMMSAS bgd. selection expression = annulus(24807.539124, 13406.085312, 1087.500000, 2175.000000, X, Y) && !ellipse(24311.165466, 13462.932144, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 04:12:39 2013] Writing fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19.gif
[Sat May 25 04:18:37 2013] Mean detx,y = (-11220.01, 247.83) 
[Sat May 25 04:18:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 04:18:47 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 04:18:48 2013] Setting source spectrum file to fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat May 25 04:18:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat May 25 04:28:55 2013] Not generating rmf since there are only 34 counts
[Sat May 25 04:28:55 2013] rmf not generated due to insufficient counts
[Sat May 25 04:30:35 2013] Updating aperture counts using extracted products
[Sat May 25 04:30:35 2013] Total counts from fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 185.00
[Sat May 25 04:30:35 2013] Total counts from fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_bgd.pi.gz = 809.00
[Sat May 25 04:30:35 2013] Got source and background scale factors 1127544.000000, 10381364.000000
[Sat May 25 04:30:35 2013] User source parameters:
  Position = (285.7, 154.7) = 1 3 26.21 -71 45 52.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 97.1 +/- 14.6
  Background aperture counts = 87.9
  Rate = 0.003 +/- 0.0004

[Sat May 25 04:30:35 2013] Updating counts from extracted products
[Sat May 25 04:30:35 2013] Set source signif. to 97.13/9.37 = 10.36
[Sat May 25 04:30:35 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 04:30:35 2013] Using photon index=1.80, rate=0.00259, arf fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19.arf
[Sat May 25 04:30:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 04:30:35 2013] Updating source flux to 6.1e-14
[Sat May 25 04:30:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 04:30:40 2013] xmm0601210401/analysis//spectral/fullrun_mos2_xmm0601210401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete