[Thu Jun 20 01:14:56 2013] Detection parameters:
  Position = (413.4, 304.2) = 0 46 52.20 -71 56 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.0 +/- 10.9
  Background counts = 14.8
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 01:14:56 2013] Off-axis axis estimate = 8.35'
[Thu Jun 20 01:53:34 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 01:53:34 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Jun 20 01:53:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.869
[Thu Jun 20 01:53:34 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.60"
[Thu Jun 20 02:10:12 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 20 02:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 02:10:12 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 20 02:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 02:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 02:10:12 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 20 02:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 02:10:12 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 20 02:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 02:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 02:44:47 2013] Warning, spatial fit 4 centroid is now closest to src. 7
[Thu Jun 20 02:44:47 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 02:44:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 02:44:47 2013] Assessing source extent using major
[Thu Jun 20 02:44:47 2013] Source does appear to be extended
[Thu Jun 20 02:44:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 03:22:12 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 03:22:12 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Jun 20 03:22:12 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.869
[Thu Jun 20 03:22:12 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.60"
[Thu Jun 20 03:38:42 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 20 03:38:42 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 20 03:38:42 2013] Fit fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Jun 20 03:38:42 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 20 03:38:42 2013] fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 20 03:38:42 2013] Fit fullrun_mos1_xmm0601210301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jun 20 04:07:18 2013] Spatial fit model total counts = 202.131000, observed total counts = 190.000000
[Thu Jun 20 04:07:18 2013] Offset between fit and detection position for source 6 = 0.207430 pixels
[Thu Jun 20 04:07:18 2013] 202.579300 total counts/ 163.594000 bgd. counts: snr = 3.048016
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.207430 pixels
  Position = (413.3, 304.4) = 0 46 52.37 -71 56 1.7
  Extent = 4.4 (3.3-6.5)", rotation angle = 0
  Source counts = 39.0 +/- 14.2
  Background counts = 163.6
  Rate = 0.001 +/- 0.0005
[Thu Jun 20 04:07:18 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 04:07:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 04:07:18 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 04:07:18 2013] Source does appear to be extended
[Thu Jun 20 04:07:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 04:40:34 2013] XMMSAS src. selection expression = ellipse(35906.502200, 26429.959400, 263.514008, 263.514008, 0.000000, X, Y)
[Thu Jun 20 04:40:34 2013] Writing source region out to fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun 20 04:40:34 2013] Extracting stamp from image fullrun_mos1_xmm0601210301_pi300-10000_cl_sm2.00.img.gz, (398, 289) - (428, 319)
[Thu Jun 20 04:40:34 2013] XMMSAS bgd. selection expression = annulus(35906.502200, 26429.959400, 439.190013, 878.380025, X, Y) && !ellipse(35892.622940, 25185.782000, 621.784818, 254.093607, 103.640500, X, Y)
[Thu Jun 20 04:40:34 2013] Writing fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6.gif
[Thu Jun 20 04:42:22 2013] Mean detx,y = (-9286.69, -7511.35) 
[Thu Jun 20 04:42:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 04:42:37 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 04:42:38 2013] Setting source spectrum file to fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 20 04:42:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun 20 04:50:02 2013] Not generating rmf since there are only 38 counts
[Thu Jun 20 04:50:02 2013] rmf not generated due to insufficient counts
[Thu Jun 20 05:02:29 2013] Updating aperture counts using extracted products
[Thu Jun 20 05:02:29 2013] Total counts from fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 54.00
[Thu Jun 20 05:02:30 2013] Total counts from fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 122.00
[Thu Jun 20 05:02:30 2013] Got source and background scale factors 219200.000000, 1556511.000000
[Thu Jun 20 05:02:30 2013] User source parameters:
  Position = (413.3, 304.4) = 0 46 52.37 -71 56 1.7
  Extent = 4.4 (3.3-6.5)", rotation angle = 0
  Source aperture counts = 36.8 +/- 8.4
  Background aperture counts = 17.2
  Rate = 0.001 +/- 0.0003

[Thu Jun 20 05:02:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 05:02:31 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6.arf
[Thu Jun 20 05:02:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 05:02:31 2013] Updating source flux to 4e-14
[Thu Jun 20 05:02:40 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 20 05:02:42 2013] xmm0601210301/analysis//spectral/fullrun_mos1_xmm0601210301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete