[Thu Jun  7 02:25:39 2012] Detection parameters:
  Position = (241.9, 293.9) = 0 55 6.13 -71 42 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 12.6
  Background counts = 15.8
  Rate = 0.003 +/- 0.0005

[Thu Jun  7 02:25:40 2012] Off-axis axis estimate = 4.11'
[Thu Jun  7 03:40:20 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 03:40:20 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Thu Jun  7 03:40:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.041
[Thu Jun  7 03:40:20 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.49"
[Thu Jun  7 04:12:49 2012] fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun  7 04:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6.csv
[Thu Jun  7 04:12:49 2012] fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun  7 04:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6.csv
[Thu Jun  7 04:12:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 04:12:49 2012] fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun  7 04:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun  7 04:12:49 2012] fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun  7 04:12:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun  7 04:12:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601210201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 04:40:38 2012] Spatial fit model total counts = 220.593000, observed total counts = 183.000000
[Thu Jun  7 04:40:38 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  7 04:40:38 2012] Spatial fit model total counts = 260.152000, observed total counts = 258.000000
[Thu Jun  7 04:40:38 2012] Offset between fit and detection position for source 14 = 7.998449 pixels
[Thu Jun  7 04:40:38 2012] Warning, changing simple spatial fit ID from 6 to 8
[Thu Jun  7 04:40:38 2012] 259.367027 total counts/ 259.367000 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 7.998449 pixels
  Position = (248.5, 289.5) = 0 54 59.98 -71 43 13.4
  Extent = 16.2 (16.2-32.4)", rotation angle = 0
  Source counts = 0.0 +/- 16.1
  Background counts = 259.4
  Rate = 7e-10 +/- 0.0004
  Deleting source due to low Poisson probability