[Wed Mar 21 11:07:34 2012] Detection parameters:
  Position = (195.4, 331.6) = 5 37 7.66 -69 12 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.0 +/- 23.0
  Background counts = 205.2
  Rate = 0.002 +/- 0.0003

[Wed Mar 21 11:07:37 2012] Off-axis axis estimate = 7.85'
[Wed Mar 21 11:22:51 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 11:22:51 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Wed Mar 21 11:22:51 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Wed Mar 21 11:22:51 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 10.35"
[Wed Mar 21 18:45:38 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87.ximg exists
[Wed Mar 21 18:45:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87.csv
[Wed Mar 21 18:45:38 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87_1.ximg exists
[Wed Mar 21 18:45:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87.csv
[Wed Mar 21 18:45:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:45:41 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Wed Mar 21 18:45:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Wed Mar 21 18:45:41 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Wed Mar 21 18:45:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Wed Mar 21 18:45:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:02:30 2012] Warning, spatial fit 87 centroid is now closest to src. 16
[Thu Mar 22 06:02:30 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:02:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:02:30 2012] Assessing source extent using major
[Thu Mar 22 06:02:30 2012] Source does appear to be extended
[Thu Mar 22 06:02:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 06:04:05 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 06:04:05 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Thu Mar 22 06:04:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Thu Mar 22 06:04:05 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 10.35"
[Thu Mar 22 15:03:48 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78.ximg exists
[Thu Mar 22 15:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78.csv
[Thu Mar 22 15:03:48 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78_1.ximg exists
[Thu Mar 22 15:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78.csv
[Thu Mar 22 15:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 15:03:51 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Thu Mar 22 15:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Thu Mar 22 15:03:51 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Thu Mar 22 15:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Thu Mar 22 15:03:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 05:05:37 2012] Source 88 is offset by -6.480447 and -0.439099 pixels which is larger than
2 X fitted extent = 5.620184 x 5.620184, not incorporating fit results
[Fri Mar 23 05:05:38 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 13.512465 pixels away
[Fri Mar 23 05:05:38 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 05:05:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 05:05:38 2012] Assessing source extent using major
[Fri Mar 23 05:05:38 2012] Source does appear to be extended
[Fri Mar 23 05:05:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 05:07:09 2012] XMMSAS src. selection expression = ellipse(16948.805069, 28798.600403, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 05:07:09 2012] Writing source region out to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88_src.reg
[Fri Mar 23 05:07:09 2012] Extracting stamp from image fullrun_pn_xmm0601200101_pi300-10000_cl_sm2.00.img.gz, (158, 294) - (233, 369)
[Fri Mar 23 05:07:09 2012] XMMSAS bgd. selection expression = annulus(16948.805069, 28798.600403, 1087.500000, 2175.000000, X, Y) && !ellipse(18074.039673, 27948.932617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15299.258400, 25527.371500, 1724.128050, 1724.128050, 0.000000, X, Y) && !ellipse(21565.646000, 31826.216000, 2983.264086, 2983.264086, 0.000000, X, Y) && !ellipse(20138.703340, 30883.302000, 1047.064030, 1047.064030, 0.000000, X, Y) && !ellipse(16351.310800, 25369.887000, 3347.744096, 515.765615, 0.000000, X, Y) && !ellipse(18429.011600, 25244.641400, 1696.752049, 445.852813, 3.325000, X, Y) && !ellipse(19888.458000, 30187.670000, 827.320024, 827.320024, 0.000000, X, Y) && !ellipse(19142.689800, 25189.280600, 1451.904042, 427.012012, 1.744200, X, Y) && !ellipse(14274.217499, 31632.111389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16274.062400, 31487.475598, 1238.240036, 1238.240036, 0.000000, X, Y) && !ellipse(15074.820000, 31140.106000, 1893.184054, 1893.184054, 0.000000, X, Y) && !ellipse(17540.594000, 31451.883200, 1719.088049, 1719.088049, 0.000000, X, Y) && !ellipse(18984.674000, 30971.666000, 3438.176099, 3438.176099, 0.000000, X, Y) && !ellipse(19425.241165, 30742.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19649.688049, 28692.516052, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 23 05:07:09 2012] Writing fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88.gif
[Fri Mar 23 09:16:17 2012] Mean detx,y = (-3278.32, 10615.10) 
[Fri Mar 23 09:16:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 09:17:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 09:17:01 2012] Setting source spectrum file to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Fri Mar 23 09:17:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Fri Mar 23 16:38:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 23 16:38:59 2012] rmf not generated due to insufficient counts
[Sat Mar 24 02:42:52 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:42:52 2012] Error reading totcts from fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sat Mar 24 02:42:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:42:59 2012] Using photon index=1.80, rate=0.0017, arf fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src88.arf
[Sat Mar 24 02:42:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:42:59 2012] Updating source flux to 8.9e-15
[Sat Mar 24 03:04:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting