[Wed Mar 21 11:07:33 2012] Detection parameters:
  Position = (358.8, 134.1) = 5 34 53.55 -69 27 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 262.1 +/- 29.1
  Background counts = 217.6
  Rate = 0.003 +/- 0.0003

[Wed Mar 21 11:07:37 2012] Off-axis axis estimate = 12.70'
[Wed Mar 21 11:22:51 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 11:22:51 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Wed Mar 21 11:22:51 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Wed Mar 21 11:22:51 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 12.78"
[Wed Mar 21 18:45:38 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52.ximg exists
[Wed Mar 21 18:45:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52.csv
[Wed Mar 21 18:45:38 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed Mar 21 18:45:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52.csv
[Wed Mar 21 18:45:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:45:40 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed Mar 21 18:45:40 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed Mar 21 18:45:40 2012] Fit fullrun_pn_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Thu Mar 22 06:02:30 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 11.512267 pixels away
[Thu Mar 22 06:02:30 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:02:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:02:30 2012] Assessing source extent using major
[Thu Mar 22 06:02:30 2012] Source does appear to be extended
[Thu Mar 22 06:02:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 06:04:05 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 06:04:05 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Thu Mar 22 06:04:05 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Thu Mar 22 06:04:05 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 12.78"
[Thu Mar 22 15:03:46 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51.ximg exists
[Thu Mar 22 15:03:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51.csv
[Thu Mar 22 15:03:46 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Mar 22 15:03:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51.csv
[Thu Mar 22 15:03:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 15:03:50 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Mar 22 15:03:50 2012] fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Mar 22 15:03:50 2012] Fit fullrun_pn_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Mar 23 05:05:38 2012] Spatial fit model total counts = 4778.910000, observed total counts = 4717.000000
[Fri Mar 23 05:05:38 2012] Offset between fit and detection position for source 53 = 0.161145 pixels
[Fri Mar 23 05:05:38 2012] 4792.761000 total counts/ 4605.100000 bgd. counts: snr = 2.765378
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.161145 pixels
  Position = (358.7, 134.1) = 5 34 53.67 -69 27 3.8
  Extent = 6.0 (4.4-7.6)", rotation angle = 0
  Source counts = 187.7 +/- 69.2
  Background counts = 4605.1
  Rate = 0.002 +/- 0.0008
[Fri Mar 23 05:05:38 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 05:05:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 05:05:38 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 05:05:38 2012] Source does appear to be extended
[Fri Mar 23 05:05:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 05:07:07 2012] XMMSAS src. selection expression = ellipse(31157.310180, 11621.343600, 359.424610, 359.424610, 0.000000, X, Y)
[Fri Mar 23 05:07:07 2012] Writing source region out to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53_src.reg
[Fri Mar 23 05:07:07 2012] Extracting stamp from image fullrun_pn_xmm0601200101_pi300-10000_cl_sm2.00.img.gz, (338, 113) - (379, 155)
[Fri Mar 23 05:07:07 2012] XMMSAS bgd. selection expression = annulus(31157.310180, 11621.343600, 599.041017, 1198.082034, X, Y)
[Fri Mar 23 05:07:07 2012] Writing fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53.gif
[Fri Mar 23 08:25:31 2012] Mean detx,y = (12879.47, -4654.08) 
[Fri Mar 23 08:25:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 08:26:13 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 08:26:14 2012] Setting source spectrum file to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri Mar 23 08:26:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Mar 24 02:42:50 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:42:50 2012] Error reading totcts from fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Mar 24 02:42:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:42:58 2012] Using photon index=1.80, rate=0.00209, arf fullrun_pn_xmm0601200101_pi300-10000_pass1_cl_src53.arf
[Sat Mar 24 02:42:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:42:58 2012] Updating source flux to 1.4e-14