[Wed Mar 21 11:10:56 2012] Detection parameters:
  Position = (300.2, 274.1) = 5 35 42.03 -69 16 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.1 +/- 25.1
  Background counts = 125.2
  Rate = 0.002 +/- 0.0003

[Wed Mar 21 11:10:59 2012] Off-axis axis estimate = 1.77'
[Wed Mar 21 23:26:49 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 23:26:49 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Mar 21 23:26:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Wed Mar 21 23:26:49 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.31"
[Thu Mar 22 06:01:51 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37.ximg exists
[Thu Mar 22 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37.csv
[Thu Mar 22 06:01:51 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Mar 22 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37.csv
[Thu Mar 22 06:01:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:01:53 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Mar 22 06:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Mar 22 06:01:53 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Mar 22 06:01:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Mar 22 06:01:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 06:03:20 2012] Warning, spatial fit 37 centroid is now closest to src. 16
[Thu Mar 22 06:03:20 2012] Spatial fit model total counts = 2180.490000, observed total counts = 2006.000000
[Thu Mar 22 06:03:20 2012] Offset between fit and detection position for source 44 = 2.853679 pixels
[Thu Mar 22 06:03:20 2012] Warning, changing simple spatial fit ID from 37 to 75
[Thu Mar 22 06:03:20 2012] 2159.913000 total counts/ 2017.180000 bgd. counts: snr = 3.177987
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.853679 pixels
  Position = (301.6, 276.6) = 5 35 40.84 -69 16 44.7
  Extent = 6.3 (4.3-9.4)", rotation angle = 0
  Source counts = 142.7 +/- 46.5
  Background counts = 2017.2
  Rate = 0.002 +/- 0.0005
[Thu Mar 22 06:03:20 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:03:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:03:20 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 06:03:20 2012] Source does appear to be extended
[Thu Mar 22 06:03:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 23:12:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 23:12:52 2012] Initial guess for spatial extent in simple fitting = 6.35"
[Thu Mar 22 23:12:52 2012] source mask rpix=1.5, npix_max = 15, mask sum = 8, frac = 0.521
[Thu Mar 22 23:12:52 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 6.35"
[Fri Mar 23 05:04:56 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_src32.ximg exists
[Fri Mar 23 05:04:56 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Mar 23 05:04:56 2012] Fit fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_src32 appears to have run properly
[Fri Mar 23 05:04:59 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Mar 23 05:04:59 2012] fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Mar 23 05:04:59 2012] Fit fullrun_mos2_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Mar 23 05:06:28 2012] Source 44 is offset by -5.214506 and -6.275563 pixels which is larger than
2 X fitted extent = 3.391871 x 5.835356, not incorporating fit results
[Fri Mar 23 05:06:28 2012] Source 44 is offset by 1.784437 and 2.197264 pixels which is larger than
2 X fitted extent = 1.669356 x 6.832690, not incorporating fit results
[Fri Mar 23 05:06:28 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 05:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 05:06:28 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 05:06:28 2012] Source does appear to be extended
[Fri Mar 23 05:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 21:46:52 2012] XMMSAS src. selection expression = ellipse(26192.514000, 24012.202000, 380.757011, 380.757011, 0.000000, X, Y)
[Fri Mar 23 21:46:52 2012] Writing source region out to fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44_src.reg
[Fri Mar 23 21:46:52 2012] Extracting stamp from image fullrun_mos2_xmm0601200101_pi300-10000_cl_sm2.00.img.gz, (280, 255) - (324, 298)
[Fri Mar 23 21:46:52 2012] XMMSAS bgd. selection expression = annulus(26192.514000, 24012.202000, 634.595018, 1269.190037, X, Y) && !ellipse(27549.721260, 24662.017000, 1258.747236, 1258.747236, 0.000000, X, Y) && !ellipse(25890.788000, 22502.822000, 886.488026, 886.488026, 0.000000, X, Y) && !ellipse(26833.817657, 23712.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27275.341064, 23710.953613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.873657, 22745.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25608.006561, 23530.488617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.666000, 23144.750200, 1231.632035, 1231.632035, 0.000000, X, Y) && !ellipse(25720.362091, 24548.984406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23750.435400, 21609.901000, 1350.616039, 199.521606, 31.351500, X, Y)
[Fri Mar 23 21:46:52 2012] Writing fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44.gif
[Fri Mar 23 22:27:29 2012] Mean detx,y = (-733.12, -1195.98) 
[Fri Mar 23 22:27:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 22:27:49 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 22:27:49 2012] Setting source spectrum file to fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Mar 23 22:27:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Mar 24 02:43:12 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:43:12 2012] Error reading totcts from fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Mar 24 02:43:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:43:16 2012] Using photon index=1.80, rate=0.00156, arf fullrun_mos2_xmm0601200101_pi300-10000_pass1_cl_src44.arf
[Sat Mar 24 02:43:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:43:16 2012] Updating source flux to 2.1e-14
[Sat Mar 24 02:54:23 2012] Flag b found in src. 44 procflags, skipping spectral fitting