[Wed Mar 21 11:08:59 2012] Detection parameters:
  Position = (295.0, 374.0) = 5 35 46.28 -69 9 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 558.8 +/- 32.5
  Background counts = 69.7
  Rate = 0.01 +/- 0.0006

[Wed Mar 21 11:09:02 2012] Off-axis axis estimate = 5.48'
[Wed Mar 21 18:45:41 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 18:45:41 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Mar 21 18:45:41 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.323
[Wed Mar 21 18:45:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.17"
[Wed Mar 21 23:26:40 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 21 23:26:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3.csv
[Wed Mar 21 23:26:40 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 21 23:26:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3.csv
[Wed Mar 21 23:26:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 23:26:42 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 21 23:26:42 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 21 23:26:42 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 22 06:02:54 2012] Warning, spatial fit 3 centroid is now closest to src. 44
[Thu Mar 22 06:02:54 2012] Source 5 is offset by 2.327571 and 9.602116 pixels which is larger than
2 X fitted extent = 1.045320 x 1.045320, not incorporating fit results
[Thu Mar 22 06:02:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:02:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:02:54 2012] Assessing source extent using major
[Thu Mar 22 06:02:54 2012] Source does appear to be extended
[Thu Mar 22 06:02:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 15:03:52 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 15:03:52 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Thu Mar 22 15:03:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.323
[Thu Mar 22 15:03:52 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.17"
[Thu Mar 22 23:12:49 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 22 23:12:49 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 22 23:12:49 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Mar 22 23:12:51 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 22 23:12:51 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 22 23:12:51 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Mar 23 05:05:57 2012] Spatial fit model total counts = 2305.850000, observed total counts = 2300.000000
[Fri Mar 23 05:05:57 2012] Offset between fit and detection position for source 5 = 2.699137 pixels
[Fri Mar 23 05:05:57 2012] 2265.984000 total counts/ 890.504000 bgd. counts: snr = 46.093145
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.699137 pixels
  Position = (296.2, 371.6) = 5 35 45.28 -69 9 51.4
  Extent = 18.3 (18.3-18.3)", rotation angle = 0
  Source counts = 1375.5 +/- 47.6
  Background counts = 890.5
  Rate = 0.02 +/- 0.0005
[Fri Mar 23 05:05:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 05:05:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 05:05:57 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 05:05:57 2012] Source does appear to be extended
[Fri Mar 23 05:05:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 05:05:57 2012] Source is confused with source 44
[Fri Mar 23 17:51:01 2012] Counts = 1375.480000, rescaling region sizes by 2.000000
[Fri Mar 23 17:51:01 2012] XMMSAS src. selection expression = ellipse(25719.749200, 32277.038000, 2199.924063, 2199.924063, 0.000000, X, Y)
[Fri Mar 23 17:51:01 2012] Writing source region out to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5_src.reg
[Fri Mar 23 17:51:01 2012] Extracting stamp from image fullrun_mos1_xmm0601200101_pi300-10000_cl_sm2.00.img.gz, (170, 245) - (423, 498)
[Fri Mar 23 17:51:01 2012] XMMSAS bgd. selection expression = annulus(25719.749200, 32277.038000, 7333.080211, 14666.160422, X, Y) && !ellipse(27539.758180, 24660.179200, 1344.482439, 1344.482439, 0.000000, X, Y) && !ellipse(29997.399231, 18682.779480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22065.023940, 32565.927800, 813.048023, 813.048023, 0.000000, X, Y) && !ellipse(25919.572800, 22592.364000, 1274.168037, 1274.168037, 0.000000, X, Y) && !ellipse(22402.094680, 28354.413400, 894.312026, 894.312026, 0.000000, X, Y) && !ellipse(25839.411000, 22444.166000, 1345.784039, 1345.784039, 0.000000, X, Y) && !ellipse(21375.354874, 32040.871735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26018.390000, 29827.216000, 337.547210, 337.547210, 0.000000, X, Y) && !ellipse(24861.920000, 21134.778000, 1181.792034, 1181.792034, 0.000000, X, Y) && !ellipse(24130.280000, 33307.201600, 1551.800045, 1551.800045, 0.000000, X, Y) && !ellipse(26192.807000, 27822.514000, 2311.840067, 747.858422, 132.972000, X, Y) && !ellipse(27116.219849, 30491.439117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21852.227341, 28628.025391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.486000, 33408.467200, 886.472026, 886.472026, 0.000000, X, Y) && !ellipse(24389.426600, 32860.366000, 1467.872042, 1467.872042, 0.000000, X, Y) && !ellipse(27670.369598, 23277.769653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.153800, 28306.988000, 1013.376029, 1013.376029, 0.000000, X, Y) && !ellipse(28368.072000, 24316.790000, 1282.856037, 1282.856037, 0.000000, X, Y) && !ellipse(26617.666412, 31662.814148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22192.175600, 25330.585000, 1266.280036, 1266.280036, 0.000000, X, Y) && !ellipse(21521.855408, 29261.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28997.998413, 23669.006805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.842377, 22603.644440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39370.502258, 20507.526688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39298.200500, 32580.540955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26300.395721, 29366.991730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.687744, 23442.899200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29599.758148, 21550.142090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.474000, 26895.640000, 1121.776032, 1121.776032, 0.000000, X, Y) && !ellipse(26191.770508, 30853.152344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25368.716000, 21737.246000, 541.934416, 541.934416, 0.000000, X, Y) && !ellipse(25845.185638, 23715.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.612274, 20586.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22535.646000, 24907.436000, 1813.904052, 1813.904052, 0.000000, X, Y)
[Fri Mar 23 17:51:01 2012] Writing fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5.gif
[Fri Mar 23 17:58:27 2012] Mean detx,y = (-2163.36, -7560.31) 
[Fri Mar 23 17:58:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 18:06:48 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 18:06:48 2012] Setting source spectrum file to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 23 18:06:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 24 02:43:03 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:43:03 2012] Error reading totcts from fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 24 02:43:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:43:06 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src5.arf
[Sat Mar 24 02:43:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:43:06 2012] Updating source flux to 1.9e-13
[Sat Mar 24 02:43:24 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Sat Mar 24 02:43:24 2012] Flag c found in src. 5 procflags, skipping spectral fitting