[Wed Mar 21 11:09:00 2012] Detection parameters:
  Position = (475.2, 237.9) = 5 33 18.27 -69 19 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.5 +/- 16.5
  Background counts = 50.4
  Rate = 0.001 +/- 0.0002

[Wed Mar 21 11:09:02 2012] Off-axis axis estimate = 13.55'
[Wed Mar 21 18:45:41 2012] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 18:45:41 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Wed Mar 21 18:45:41 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.980
[Wed Mar 21 18:45:41 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 13.20"
[Wed Mar 21 23:26:41 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59.ximg exists
[Wed Mar 21 23:26:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59.csv
[Wed Mar 21 23:26:41 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed Mar 21 23:26:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59.csv
[Wed Mar 21 23:26:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 23:26:44 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed Mar 21 23:26:44 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed Mar 21 23:26:44 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Thu Mar 22 06:02:54 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 11.950653 pixels away
[Thu Mar 22 06:02:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 06:02:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 06:02:54 2012] Assessing source extent using major
[Thu Mar 22 06:02:54 2012] Source does appear to be extended
[Thu Mar 22 06:02:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 15:03:52 2012] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 15:03:52 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Thu Mar 22 15:03:52 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.980
[Thu Mar 22 15:03:52 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 13.20"
[Thu Mar 22 23:12:50 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src53.ximg exists
[Thu Mar 22 23:12:50 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src53_1.ximg exists
[Thu Mar 22 23:12:50 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_src53 appears to have run properly
[Thu Mar 22 23:12:52 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Thu Mar 22 23:12:52 2012] fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Thu Mar 22 23:12:52 2012] Fit fullrun_mos1_xmm0601200101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Mar 23 05:05:57 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 17.144858 pixels away
[Fri Mar 23 05:05:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 05:05:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 05:05:57 2012] Assessing source extent using major
[Fri Mar 23 05:05:57 2012] Source does appear to be extended
[Fri Mar 23 05:05:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 17:51:03 2012] XMMSAS src. selection expression = ellipse(41292.361145, 20644.637711, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 17:51:03 2012] Writing source region out to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33_src.reg
[Fri Mar 23 17:51:03 2012] Extracting stamp from image fullrun_mos1_xmm0601200101_pi300-10000_cl_sm2.00.img.gz, (438, 200) - (513, 275)
[Fri Mar 23 17:51:03 2012] XMMSAS bgd. selection expression = annulus(41292.361145, 20644.637711, 1087.500000, 2175.000000, X, Y) && !ellipse(39370.502258, 20507.526688, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 23 17:51:03 2012] Writing fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33.gif
[Fri Mar 23 18:45:39 2012] Mean detx,y = (14292.98, 2855.62) 
[Fri Mar 23 18:45:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 18:45:55 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 18:45:56 2012] Setting source spectrum file to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Mar 23 18:45:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Mar 23 21:35:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 23 21:35:14 2012] rmf not generated due to insufficient counts
[Sat Mar 24 02:43:05 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:43:05 2012] Error reading totcts from fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 24 02:43:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:43:09 2012] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0601200101_pi300-10000_pass1_cl_src33.arf
[Sat Mar 24 02:43:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:43:09 2012] Updating source flux to 2.7e-14
[Sat Mar 24 02:43:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting