[Fri Nov 25 20:15:32 2011] Detection parameters:
  Position = (400.4, 283.7) = 14 10 50.40 79 20 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.9 +/- 14.8
  Background counts = 94.3
  Rate = 0.01 +/- 0.001

[Fri Nov 25 20:15:33 2011] Off-axis axis estimate = 7.47'
[Fri Nov 25 20:31:20 2011] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 20:31:20 2011] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Nov 25 20:31:20 2011] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.653
[Fri Nov 25 20:31:20 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.16"
[Fri Nov 25 20:41:16 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Nov 25 20:41:16 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Nov 25 20:41:16 2011] Fit fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Nov 25 20:41:16 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Nov 25 20:41:16 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Nov 25 20:41:16 2011] Fit fullrun_mos2_xmm0601180101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Nov 25 20:41:20 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.157263 pixels away
[Fri Nov 25 20:41:20 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 20:41:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 20:41:20 2011] Assessing source extent using major
[Fri Nov 25 20:41:20 2011] Source does appear to be extended
[Fri Nov 25 20:41:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 20:51:09 2011] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 20:51:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 20:51:09 2011] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Nov 25 20:51:09 2011] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.653
[Fri Nov 25 20:51:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.16"
[Fri Nov 25 21:00:52 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 21:00:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 21:00:52 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 21:00:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 21:00:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 21:00:52 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 21:00:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 21:00:52 2011] fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 21:00:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 21:00:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601180101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 21:00:56 2011] Spatial fit model total counts = 192.015000, observed total counts = 217.000000
[Fri Nov 25 21:00:56 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov 25 21:00:56 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 21:00:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 21:00:56 2011] Assessing source extent using major
[Fri Nov 25 21:00:56 2011] Source does appear to be extended
[Fri Nov 25 21:00:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 21:24:48 2011] XMMSAS src. selection expression = ellipse(34782.168243, 24636.690643, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 21:24:48 2011] Writing source region out to fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2_src.reg
[Fri Nov 25 21:24:48 2011] Extracting stamp from image fullrun_mos2_xmm0601180101_pi300-10000_cl_sm2.00.img.gz, (363, 246) - (438, 321)
[Fri Nov 25 21:24:48 2011] XMMSAS bgd. selection expression = annulus(34782.168243, 24636.690643, 1087.500000, 2175.000000, X, Y)
[Fri Nov 25 21:24:48 2011] Writing fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2.gif
[Fri Nov 25 21:25:10 2011] Mean detx,y = (-6992.39, 2311.90) 
[Fri Nov 25 21:25:11 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 21:25:28 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 21:25:28 2011] Setting source spectrum file to fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Nov 25 21:25:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Nov 25 21:26:35 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 21:26:35 2011] rmf not generated due to insufficient counts
[Fri Nov 25 21:27:20 2011] Updating aperture counts using extracted products
[Fri Nov 25 21:27:20 2011] Error reading totcts from fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Nov 25 21:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 21:27:20 2011] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2.arf
[Fri Nov 25 21:27:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 21:27:20 2011] Updating source flux to 1.9e-13
[Fri Nov 25 21:28:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Nov 25 21:28:09 2011] xmm0601180101/analysis//spectral/fullrun_mos2_xmm0601180101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete