[Mon May 6 23:25:00 2013] Detection parameters: Position = (264.3, 275.9) = 7 20 29.65 -31 26 29.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 89.5 +/- 17.5 Background counts = 104.1 Rate = 0.008 +/- 0.002 [Mon May 6 23:25:01 2013] Off-axis axis estimate = 2.97' [Mon May 6 23:26:46 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting [Mon May 6 23:26:46 2013] Initial guess for spatial extent in simple fitting = 7.91" [Mon May 6 23:26:46 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.604 [Mon May 6 23:26:46 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.91" [Tue May 7 00:25:11 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28.ximg exists [Tue May 7 00:25:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28.csv [Tue May 7 00:25:11 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28_1.ximg exists [Tue May 7 00:25:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28.csv [Tue May 7 00:25:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 00:25:11 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Tue May 7 00:25:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28.csv [Tue May 7 00:25:11 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Tue May 7 00:25:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28.csv [Tue May 7 00:25:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601170301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 00:33:07 2013] Source 29 is offset by 5.159184 and 2.751152 pixels which is larger than 2 X fitted extent = 7.275173 x 1.545784, not incorporating fit results [Tue May 7 00:33:07 2013] Vigneting correction estimate = 1.000000 [Tue May 7 00:33:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 00:33:07 2013] Assessing source extent using major [Tue May 7 00:33:07 2013] Source does appear to be extended [Tue May 7 00:33:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 00:33:13 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting [Tue May 7 00:33:13 2013] Initial guess for spatial extent in simple fitting = 7.91" [Tue May 7 00:33:13 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.604 [Tue May 7 00:33:13 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 7.91" [Tue May 7 01:54:49 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26.ximg exists [Tue May 7 01:54:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26.csv [Tue May 7 01:54:49 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26_1.ximg exists [Tue May 7 01:54:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26.csv [Tue May 7 01:54:49 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 01:54:50 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Tue May 7 01:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26.csv [Tue May 7 01:54:50 2013] fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Tue May 7 01:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26.csv [Tue May 7 01:54:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601170301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 02:02:35 2013] Source 29 is offset by -5.917161 and -7.438618 pixels which is larger than 2 X fitted extent = 1.860984 x 1.199503, not incorporating fit results [Tue May 7 02:02:35 2013] Vigneting correction estimate = 1.000000 [Tue May 7 02:02:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 02:02:35 2013] Assessing source extent using major [Tue May 7 02:02:35 2013] Source does appear to be extended [Tue May 7 02:02:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 02:02:43 2013] XMMSAS src. selection expression = ellipse(22943.304993, 23956.602234, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 02:02:43 2013] Writing source region out to fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_src.reg [Tue May 7 02:02:43 2013] Extracting stamp from image fullrun_pn_xmm0601170301_pi300-10000_cl_sm2.00.img.gz, (227, 238) - (302, 313) [Tue May 7 02:02:43 2013] XMMSAS bgd. selection expression = annulus(22943.304993, 23956.602234, 1087.500000, 2175.000000, X, Y) && !ellipse(24190.952800, 24794.517200, 1430.472041, 1391.956840, 40.490597, X, Y) && !ellipse(24414.239014, 23448.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.299255, 23595.446564, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 02:02:43 2013] Writing fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29.gif [Tue May 7 02:23:40 2013] Mean detx,y = (878.60, -1578.96) [Tue May 7 02:23:42 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 02:23:54 2013] Binned source spectrum to 10 counts/bin [Tue May 7 02:23:54 2013] Setting source spectrum file to fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Tue May 7 02:23:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_bgd.pi.gz [Tue May 7 02:52:55 2013] Not generating rmf since there are only 89 counts [Tue May 7 02:52:55 2013] rmf not generated due to insufficient counts [Tue May 7 03:19:10 2013] Updating aperture counts using extracted products [Tue May 7 03:19:10 2013] Total counts from fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 533.00 [Tue May 7 03:19:10 2013] Total counts from fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2394.00 [Tue May 7 03:19:10 2013] Got source and background scale factors 883029.000000, 6356613.000000 [Tue May 7 03:19:10 2013] User source parameters: Position = (264.3, 275.9) = 7 20 29.65 -31 26 29.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 200.4 +/- 24.1 Background aperture counts = 332.6 Rate = 0.02 +/- 0.003 [Tue May 7 03:19:10 2013] Updating counts from extracted products [Tue May 7 03:19:10 2013] Set source signif. to 200.44/18.24 = 10.99 [Tue May 7 03:19:12 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 03:19:12 2013] Using photon index=1.80, rate=0.0239, arf fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29.arf [Tue May 7 03:19:12 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 03:19:12 2013] Updating source flux to 1e-13 [Tue May 7 03:19:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 7 03:19:21 2013] xmm0601170301/analysis//spectral/fullrun_pn_xmm0601170301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete