[Thu Mar 15 12:54:43 2012] Detection parameters:
  Position = (410.9, 479.8) = 0 46 35.06 -20 35 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 11.6
  Background counts = 19.3
  Rate = 0.002 +/- 0.0003

[Thu Mar 15 12:54:44 2012] Off-axis axis estimate = 15.47'
[Thu Mar 15 13:47:01 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:47:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 13:47:01 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Thu Mar 15 13:47:01 2012] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.921
[Thu Mar 15 13:47:01 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 14.17"
[Thu Mar 15 14:26:01 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Mar 15 14:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21.csv
[Thu Mar 15 14:26:01 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Mar 15 14:26:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21.csv
[Thu Mar 15 14:26:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 14:26:02 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Mar 15 14:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Mar 15 14:26:02 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Mar 15 14:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Mar 15 14:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601010101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:15:09 2012] Spatial fit model total counts = 300.134000, observed total counts = 223.000000
[Thu Mar 15 15:15:09 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 15:15:09 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:15:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:15:09 2012] Assessing source extent using major
[Thu Mar 15 15:15:09 2012] Source does appear to be extended
[Thu Mar 15 15:15:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:51:30 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:51:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 15:51:30 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Thu Mar 15 15:51:30 2012] source mask rpix=3.3, npix_max = 56, mask sum = 52, frac = 0.921
[Thu Mar 15 15:51:30 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 14.17"
[Thu Mar 15 16:24:45 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar 15 16:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 15 16:24:45 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar 15 16:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 15 16:24:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:24:45 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar 15 16:24:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 15 16:24:45 2012] fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar 15 16:24:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 15 16:24:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601010101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 17:00:03 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 17.764533 pixels away
[Thu Mar 15 17:00:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 17:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 17:00:03 2012] Assessing source extent using major
[Thu Mar 15 17:00:03 2012] Source does appear to be extended
[Thu Mar 15 17:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 17:40:24 2012] XMMSAS src. selection expression = ellipse(35701.381866, 41696.177826, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 17:40:24 2012] Writing source region out to fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9_src.reg
[Thu Mar 15 17:40:24 2012] Extracting stamp from image fullrun_mos1_xmm0601010101_pi300-10000_cl_sm2.00.img.gz, (373, 442) - (448, 517)
[Thu Mar 15 17:40:24 2012] XMMSAS bgd. selection expression = annulus(35701.381866, 41696.177826, 1087.500000, 2175.000000, X, Y)
[Thu Mar 15 17:40:24 2012] Writing fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9.gif
[Thu Mar 15 17:48:08 2012] Mean detx,y = (16842.86, 1353.02) 
[Thu Mar 15 17:48:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 17:48:26 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 17:48:26 2012] Setting source spectrum file to fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 15 17:48:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Mar 15 18:01:26 2012] Not generating rmf since there are only 67 counts
[Thu Mar 15 18:01:26 2012] rmf not generated due to insufficient counts
[Thu Mar 15 18:28:08 2012] Updating aperture counts using extracted products
[Thu Mar 15 18:28:08 2012] Error reading totcts from fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Mar 15 18:28:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 18:28:09 2012] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0601010101_pi300-10000_pass1_cl_src9.arf
[Thu Mar 15 18:28:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 18:28:09 2012] Updating source flux to 7e-14
[Thu Mar 15 18:28:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting