[Tue May  1 13:42:35 2012] Detection parameters:
  Position = (276.9, 352.7) = 3 55 36.15 31 5 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.3 +/- 39.7
  Background counts = 788.5
  Rate = 0.002 +/- 0.0005

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 4.23'
[Tue May  1 14:27:16 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Tue May  1 14:27:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 8.54"
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75.csv
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75_1.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75.csv
[Wed May  2 15:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Wed May  2 15:32:36 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Tue May  8 21:21:11 2012] Spatial fit model total counts = 7100.520000, observed total counts = 7100.000000
[Tue May  8 21:21:11 2012] Offset between fit and detection position for source 82 = 7.681055 pixels
[Tue May  8 21:21:11 2012] 7103.245000 total counts/ 6851.500000 bgd. counts: snr = 3.041361
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 7.681055 pixels
  Position = (270.0, 356.2) = 3 55 38.47 31 5 50.6
  Extent = 17.1 (17.1-34.2)", rotation angle = 0
  Source counts = 251.7 +/- 84.3
  Background counts = 6851.5
  Rate = 0.002 +/- 0.0008
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 17.09"
[Tue May  8 21:23:35 2012] source mask rpix=3.9, npix_max = 78, mask sum = 72, frac = 0.918
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 17.09"
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61.csv
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61.csv
[Fri May 11 06:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly