[Tue May  1 13:42:35 2012] Detection parameters:
  Position = (160.0, 373.2) = 3 56 15.75 31 7 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.5 +/- 30.5
  Background counts = 278.9
  Rate = 0.002 +/- 0.0002

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 11.41'
[Tue May  1 14:27:16 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Tue May  1 14:27:16 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 12.13"
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69.ximg exists
[Wed May  2 15:32:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69.csv
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed May  2 15:32:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69.csv
[Wed May  2 15:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed May  2 15:32:36 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Tue May  8 21:21:11 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 12.418275 pixels away
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:23:35 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Tue May  8 21:23:35 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 12.13"
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57.ximg exists
[Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57.csv
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57.csv
[Fri May 11 06:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly