[Tue May  1 13:42:34 2012] Detection parameters:
  Position = (383.4, 375.2) = 3 55 0.07 31 7 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.4 +/- 34.7
  Background counts = 569.9
  Rate = 0.002 +/- 0.0005

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 8.30'
[Tue May  1 14:27:16 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Tue May  1 14:27:16 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 10.58"
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65.csv
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65_1.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65.csv
[Wed May  2 15:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Wed May  2 15:32:36 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue May  8 21:21:11 2012] Spatial fit model total counts = 4790.650000, observed total counts = 4793.000000
[Tue May  8 21:21:11 2012] Offset between fit and detection position for source 71 = 6.052748 pixels
[Tue May  8 21:21:11 2012] 4628.687000 total counts/ 3828.810000 bgd. counts: snr = 12.926808
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 6.052748 pixels
  Position = (386.2, 380.6) = 3 54 59.12 31 7 36.5
  Extent = 21.2 (21.1-42.3)", rotation angle = 0
  Source counts = 799.9 +/- 68.0
  Background counts = 3828.8
  Rate = 0.007 +/- 0.0006
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 21.16"
[Tue May  8 21:23:35 2012] source mask rpix=4.9, npix_max = 115, mask sum = 121, frac = 1.051
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 21.16"
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54.csv
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54.csv
[Fri May 11 06:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly