[Tue May  1 13:42:34 2012] Detection parameters:
  Position = (344.8, 381.9) = 3 55 13.14 31 7 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.3 +/- 42.3
  Background counts = 744.4
  Rate = 0.005 +/- 0.0005

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 6.92'
[Tue May  1 14:27:16 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Tue May  1 14:27:16 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.170
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 9.89"
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64.csv
[Wed May  2 15:32:33 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64_1.ximg exists
[Wed May  2 15:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64.csv
[Wed May  2 15:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Wed May  2 15:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Wed May  2 15:32:36 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Wed May  2 15:32:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Wed May  2 15:32:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:21:11 2012] Spatial fit model total counts = 6739.710000, observed total counts = 5712.000000
[Tue May  8 21:21:11 2012] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:23:35 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Tue May  8 21:23:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.170
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 9.89"
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53.csv
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri May 11 06:52:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53.csv
[Fri May 11 06:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri May 11 06:52:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri May 11 06:52:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri May 11 06:52:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes