[Tue May 1 13:42:28 2012] Detection parameters: Position = (298.0, 232.0) = 3 55 29.01 30 56 53.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 26762.4 +/- 214.2 Background counts = 632.5 Rate = 0.3 +/- 0.003 [Tue May 1 13:42:44 2012] Off-axis axis estimate = 4.82' [Tue May 1 14:27:16 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting [Tue May 1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 8.84" [Tue May 1 14:27:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.170 [Tue May 1 14:27:16 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.84" [Wed May 2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src32.ximg exists [Wed May 2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src32_1.ximg exists [Wed May 2 15:32:32 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src32 appears to have run properly [Wed May 2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Wed May 2 15:32:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32.csv [Wed May 2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Wed May 2 15:32:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32.csv [Wed May 2 15:32:35 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 8 21:21:10 2012] Spatial fit model total counts = 75973.800000, observed total counts = 75997.000000 [Tue May 8 21:21:10 2012] Offset between fit and detection position for source 37 = 0.580053 pixels [Tue May 8 21:21:10 2012] 66663.700000 total counts/ 21795.300000 bgd. counts: snr = 303.919914 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.580053 pixels Position = (297.8, 231.5) = 3 55 29.08 30 56 48.0 Extent = 16.3 (16.3-32.6)" x 5.3 (5.2-5.3)", rotation angle = 105 (105-105) degrees Source counts = 44868.4 +/- 258.2 Background counts = 21795.3 Rate = 0.4 +/- 0.002 [Tue May 8 21:21:11 2012] Vigneting correction estimate = 1.000000 [Tue May 8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 21:21:11 2012] Assessing source extent using major axis lower bound [Tue May 8 21:21:11 2012] Source does appear to be extended [Tue May 8 21:21:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.06 [Tue May 8 21:21:11 2012] Source is asymmetric [Tue May 8 21:21:11 2012] Source is confused with source 35 [Tue May 8 21:21:11 2012] Source is confused with source 36 [Tue May 8 21:21:11 2012] Source is confused with source 38 [Tue May 8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 10.78" [Tue May 8 21:23:35 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014 [Tue May 8 21:23:35 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.78" [Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31.ximg exists [Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31.csv [Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31_1.ximg exists [Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31.csv [Fri May 11 06:52:15 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly