[Tue May  1 13:42:28 2012] Detection parameters:
  Position = (299.9, 241.0) = 3 55 28.36 30 57 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27017.7 +/- 214.0
  Background counts = 728.6
  Rate = 0.3 +/- 0.003

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 4.17'
[Tue May  1 14:27:16 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Tue May  1 14:27:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.51"
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src30.ximg exists
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed May  2 15:32:32 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src30 appears to have run properly
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed May  2 15:32:35 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue May  8 21:21:10 2012] Spatial fit model total counts = 77321.900000, observed total counts = 77169.000000
[Tue May  8 21:21:10 2012] Offset between fit and detection position for source 35 = 0.788262 pixels
[Tue May  8 21:21:10 2012] 67591.600000 total counts/ 23293.500000 bgd. counts: snr = 290.246990
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.788262 pixels
  Position = (299.7, 240.2) = 3 55 28.43 30 57 26.3
  Extent = 16.3" x 5.3", rotation angle = 105
  Source counts = 44298.1 +/- 260.0
  Background counts = 23293.5
  Rate = 0.4 +/- 0.002
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 3.06
[Tue May  8 21:21:11 2012] Source is asymmetric
[Tue May  8 21:21:11 2012] Source is confused with source 34
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue May  8 21:23:35 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.82"
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29.ximg exists
[Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29.csv
[Fri May 11 06:52:15 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri May 11 06:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29.csv
[Fri May 11 06:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly