[Tue May  1 13:42:28 2012] Detection parameters:
  Position = (302.0, 251.0) = 3 55 27.65 30 58 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26808.9 +/- 217.7
  Background counts = 840.8
  Rate = 0.3 +/- 0.003

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 3.45'
[Tue May  1 14:27:16 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Tue May  1 14:27:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.710
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.15"
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src28.ximg exists
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May  2 15:32:32 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May  2 15:32:35 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue May  8 21:21:10 2012] Spatial fit model total counts = 79046.700000, observed total counts = 78981.000000
[Tue May  8 21:21:10 2012] Offset between fit and detection position for source 33 = 0.516979 pixels
[Tue May  8 21:21:10 2012] 70291.900000 total counts/ 25600.000000 bgd. counts: snr = 279.324375
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.516979 pixels
  Position = (301.9, 250.5) = 3 55 27.69 30 58 10.8
  Extent = 16.3" x 5.3", rotation angle = 105
  Source counts = 44691.9 +/- 265.1
  Background counts = 25600.0
  Rate = 0.4 +/- 0.002
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 3.08
[Tue May  8 21:21:11 2012] Source is asymmetric
[Tue May  8 21:21:11 2012] Source is confused with source 31
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Tue May  8 21:23:35 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.80"
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27.csv
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27.csv
[Fri May 11 06:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 11 06:52:17 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 11 06:52:17 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly