[Tue May  1 13:42:27 2012] Detection parameters:
  Position = (303.0, 256.0) = 3 55 27.30 30 58 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27324.7 +/- 222.4
  Background counts = 917.3
  Rate = 0.3 +/- 0.003

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 3.10'
[Tue May  1 14:27:16 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue May  1 14:27:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.734
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.98"
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src27.ximg exists
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May  2 15:32:32 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src27 appears to have run properly
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May  2 15:32:35 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue May  8 21:21:10 2012] Spatial fit model total counts = 79447.400000, observed total counts = 80361.000000
[Tue May  8 21:21:10 2012] Offset between fit and detection position for source 32 = 0.284117 pixels
[Tue May  8 21:21:10 2012] 70713.600000 total counts/ 25600.000000 bgd. counts: snr = 281.960000
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.284117 pixels
  Position = (303.0, 255.7) = 3 55 27.31 30 58 33.5
  Extent = 16.3" x 5.3", rotation angle = 105
  Source counts = 45113.6 +/- 265.9
  Background counts = 25600.0
  Rate = 0.4 +/- 0.002
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 3.06
[Tue May  8 21:21:11 2012] Source is asymmetric
[Tue May  8 21:21:11 2012] Source is confused with source 31
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue May  8 21:23:35 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.82"
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26.csv
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26.csv
[Fri May 11 06:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May 11 06:52:16 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly