[Tue May  1 13:42:27 2012] Detection parameters:
  Position = (303.9, 260.0) = 3 55 26.99 30 58 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20024.6 +/- 214.2
  Background counts = 983.6
  Rate = 0.2 +/- 0.002

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 2.81'
[Tue May  1 14:27:16 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Tue May  1 14:27:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.755
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.84"
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26.ximg exists
[Wed May  2 15:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26.csv
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed May  2 15:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26.csv
[Wed May  2 15:32:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed May  2 15:32:35 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue May  8 21:21:10 2012] Spatial fit model total counts = 82006.700000, observed total counts = 84985.000000
[Tue May  8 21:21:10 2012] Offset between fit and detection position for source 31 = 1.347031 pixels
[Tue May  8 21:21:10 2012] Warning, changing simple spatial fit ID from 26 to 25
[Tue May  8 21:21:10 2012] 79046.700000 total counts/ 25600.000000 bgd. counts: snr = 334.041875
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.347031 pixels
  Position = (303.9, 261.4) = 3 55 27.01 30 58 58.1
  Extent = 15.3 (15.3-15.3)", rotation angle = 0
  Source counts = 53446.7 +/- 281.2
  Background counts = 25600.0
  Rate = 0.5 +/- 0.003
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:11 2012] Source is confused with source 28
[Tue May  8 21:21:11 2012] Source is confused with source 29
[Tue May  8 21:21:11 2012] Source is confused with source 32
[Tue May  8 21:21:11 2012] Source is confused with source 33
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 15.29"
[Tue May  8 21:23:35 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.993
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 15.29"
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25.csv
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25.csv
[Fri May 11 06:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 11 06:52:16 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly