[Tue May  1 13:42:27 2012] Detection parameters:
  Position = (304.8, 265.0) = 3 55 26.68 30 59 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28271.3 +/- 227.1
  Background counts = 1044.2
  Rate = 0.3 +/- 0.002

[Tue May  1 13:42:44 2012] Off-axis axis estimate = 2.47'
[Tue May  1 14:27:16 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue May  1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Tue May  1 14:27:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.782
[Tue May  1 14:27:16 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.66"
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25.ximg exists
[Wed May  2 15:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25.csv
[Wed May  2 15:32:32 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May  2 15:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25.csv
[Wed May  2 15:32:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May  2 15:32:35 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May  2 15:32:35 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue May  8 21:21:10 2012] Warning, spatial fit 25 centroid is now closest to src. 31
[Tue May  8 21:21:10 2012] Spatial fit model total counts = 85852.900000, observed total counts = 81824.000000
[Tue May  8 21:21:10 2012] Offset between fit and detection position for source 29 = 0.983842 pixels
[Tue May  8 21:21:10 2012] Warning, changing simple spatial fit ID from 25 to 26
[Tue May  8 21:21:10 2012] 65531.652971 total counts/ 0.252971 bgd. counts: snr = 130290.898031
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.983842 pixels
  Position = (304.5, 265.9) = 3 55 26.80 30 59 17.9
  Extent = 15.7 (15.7-31.3)", rotation angle = 0
  Source counts = 65531.4 +/- 256.0
  Background counts = 0.3
  Rate = 0.6 +/- 0.002
[Tue May  8 21:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:11 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:21:11 2012] Source does appear to be extended
[Tue May  8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:11 2012] Source is confused with source 27
[Tue May  8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 21:23:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 15.67"
[Tue May  8 21:23:35 2012] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.069
[Tue May  8 21:23:35 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 15.67"
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24.csv
[Fri May 11 06:52:14 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May 11 06:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24.csv
[Fri May 11 06:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May 11 06:52:16 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly