[Tue May 1 13:42:41 2012] Detection parameters: Position = (379.5, 285.8) = 3 55 1.43 31 0 42.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 259.4 +/- 41.3 Background counts = 783.4 Rate = 0.003 +/- 0.0005 [Tue May 1 13:42:44 2012] Off-axis axis estimate = 5.95' [Tue May 1 14:27:16 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting [Tue May 1 14:27:16 2012] Initial guess for spatial extent in simple fitting = 9.40" [Tue May 1 14:27:16 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.883 [Tue May 1 14:27:16 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 9.40" [Wed May 2 15:32:34 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src100.ximg exists [Wed May 2 15:32:34 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src100_1.ximg exists [Wed May 2 15:32:34 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_src100 appears to have run properly [Wed May 2 15:32:37 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists [Wed May 2 15:32:37 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists [Wed May 2 15:32:37 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly [Tue May 8 21:21:11 2012] Spatial fit model total counts = 7655.290000, observed total counts = 7654.000000 [Tue May 8 21:21:11 2012] Offset between fit and detection position for source 111 = 6.670424 pixels [Tue May 8 21:21:11 2012] 7608.046000 total counts/ 7127.620000 bgd. counts: snr = 5.690550 Spatial fit parameters: Offset between fit and detection position for source 111 = 6.670424 pixels Position = (384.7, 281.7) = 3 54 59.66 31 0 26.3 Extent = 18.8 (18.8-37.6)", rotation angle = 0 Source counts = 480.4 +/- 87.2 Background counts = 7127.6 Rate = 0.004 +/- 0.0008 [Tue May 8 21:21:11 2012] Vigneting correction estimate = 1.000000 [Tue May 8 21:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 21:21:11 2012] Assessing source extent using major axis lower bound [Tue May 8 21:21:11 2012] Source does appear to be extended [Tue May 8 21:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 21:23:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 8 21:23:35 2012] Initial guess for spatial extent in simple fitting = 18.80" [Tue May 8 21:23:35 2012] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.968 [Tue May 8 21:23:35 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 18.80" [Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82.ximg exists [Fri May 11 06:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82.csv [Fri May 11 06:52:16 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82_1.ximg exists [Fri May 11 06:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82.csv [Fri May 11 06:52:16 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 11 06:52:18 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists [Fri May 11 06:52:18 2012] fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists [Fri May 11 06:52:18 2012] Fit fullrun_pn_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly