[Tue May  1 13:43:02 2012] Detection parameters:
  Position = (329.2, 326.9) = 3 55 18.44 31 3 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8759.5 +/- 122.7
  Background counts = 509.5
  Rate = 0.08 +/- 0.001

[Tue May  1 13:43:22 2012] Off-axis axis estimate = 3.04'
[Sun May  6 17:57:23 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun May  6 17:57:23 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun May  6 17:57:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.785
[Sun May  6 17:57:23 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.95"
[Tue May  8 21:20:15 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7.ximg exists
[Tue May  8 21:20:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7.csv
[Tue May  8 21:20:15 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May  8 21:20:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7.csv
[Tue May  8 21:20:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May  8 21:20:18 2012] Fit fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue May  8 21:22:33 2012] Spatial fit model total counts = 61482.700000, observed total counts = 59992.000000
[Tue May  8 21:22:33 2012] Offset between fit and detection position for source 8 = 5.975035 pixels
[Tue May  8 21:22:33 2012] 33799.000000 total counts/ 14825.900000 bgd. counts: snr = 155.821637
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.975035 pixels
  Position = (323.4, 325.5) = 3 55 20.40 31 3 37.0
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 18973.1 +/- 183.8
  Background counts = 14825.9
  Rate = 0.2 +/- 0.002
[Tue May  8 21:22:35 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:22:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:22:35 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:22:35 2012] Source does appear to be extended
[Tue May  8 21:22:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:22:35 2012] Source is confused with source 6
[Tue May 15 23:17:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 23:17:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 23:17:02 2012] Initial guess for spatial extent in simple fitting = 15.90"
[Tue May 15 23:17:02 2012] source mask rpix=3.7, npix_max = 69, mask sum = 30, frac = 0.435
[Tue May 15 23:17:02 2012] Skipping simple spatial due to low active detector fraction