[Tue May  1 13:43:06 2012] Detection parameters:
  Position = (355.3, 487.9) = 3 55 9.56 31 15 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.3 +/- 23.4
  Background counts = 72.5
  Rate = 0.002 +/- 0.0002

[Tue May  1 13:43:22 2012] Off-axis axis estimate = 14.34'
[Sun May  6 17:57:23 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sun May  6 17:57:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 17:57:23 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Sun May  6 17:57:23 2012] source mask rpix=3.1, npix_max = 52, mask sum = 51, frac = 0.970
[Sun May  6 17:57:23 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 13.60"
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78.ximg exists
[Tue May  8 21:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78.csv
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78_1.ximg exists
[Tue May  8 21:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78.csv
[Tue May  8 21:20:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:20:20 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Tue May  8 21:20:20 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Tue May  8 21:20:20 2012] Fit fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Tue May  8 21:22:34 2012] Spatial fit model total counts = 1645.880000, observed total counts = 1566.000000
[Tue May  8 21:22:34 2012] Offset between fit and detection position for source 34 = 0.860482 pixels
[Tue May  8 21:22:34 2012] 1424.196000 total counts/ 1110.350000 bgd. counts: snr = 9.418606
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.860482 pixels
  Position = (354.6, 488.5) = 3 55 9.78 31 15 26.0
  Extent = 14.5 (11.6-19.9)", rotation angle = 0
  Source counts = 313.8 +/- 37.7
  Background counts = 1110.3
  Rate = 0.003 +/- 0.0003
[Tue May  8 21:22:35 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:22:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:22:35 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:22:35 2012] Source does appear to be extended
[Tue May  8 21:22:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:22:35 2012] Source is confused with source 35
[Tue May 15 23:17:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 23:17:02 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Tue May 15 23:17:02 2012] source mask rpix=3.3, npix_max = 58, mask sum = 46, frac = 0.786
[Tue May 15 23:17:02 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 14.46"