[Tue May  1 13:43:05 2012] Detection parameters:
  Position = (352.0, 297.1) = 3 55 10.72 31 1 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 804.9 +/- 49.5
  Background counts = 518.2
  Rate = 0.007 +/- 0.0004

[Tue May  1 13:43:22 2012] Off-axis axis estimate = 3.88'
[Sun May  6 17:57:23 2012] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Sun May  6 17:57:23 2012] Initial guess for spatial extent in simple fitting = 8.37"
[Sun May  6 17:57:23 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.851
[Sun May  6 17:57:23 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.37"
[Tue May  8 21:20:16 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29.ximg exists
[Tue May  8 21:20:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29.csv
[Tue May  8 21:20:16 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue May  8 21:20:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29.csv
[Tue May  8 21:20:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:20:19 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue May  8 21:20:19 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue May  8 21:20:19 2012] Fit fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue May  8 21:22:34 2012] Spatial fit model total counts = 10162.500000, observed total counts = 10132.000000
[Tue May  8 21:22:34 2012] Offset between fit and detection position for source 26 = 7.337611 pixels
[Tue May  8 21:22:34 2012] 9746.470000 total counts/ 7297.990000 bgd. counts: snr = 28.661237
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.337611 pixels
  Position = (345.8, 301.0) = 3 55 12.83 31 1 50.5
  Extent = 16.7 (16.7-33.5)", rotation angle = 0
  Source counts = 2448.5 +/- 98.7
  Background counts = 7298.0
  Rate = 0.02 +/- 0.0008
[Tue May  8 21:22:34 2012] Source 26 is offset by -4.336207 and -5.886322 pixels which is larger than
2 X fitted extent = 0.986800 x 0.986800, not incorporating fit results
[Tue May  8 21:22:35 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:22:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:22:35 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:22:35 2012] Source does appear to be extended
[Tue May  8 21:22:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 23:17:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 23:17:02 2012] Initial guess for spatial extent in simple fitting = 16.74"
[Tue May 15 23:17:02 2012] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.952
[Tue May 15 23:17:02 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 16.74"