[Tue May  1 13:43:02 2012] Detection parameters:
  Position = (282.9, 303.2) = 3 55 34.12 31 1 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2346.2 +/- 79.6
  Background counts = 447.6
  Rate = 0.02 +/- 0.0007

[Tue May  1 13:43:22 2012] Off-axis axis estimate = 1.18'
[Sun May  6 17:57:23 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Sun May  6 17:57:23 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Sun May  6 17:57:23 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.672
[Sun May  6 17:57:23 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.02"
[Tue May  8 21:20:15 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11.ximg exists
[Tue May  8 21:20:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11.csv
[Tue May  8 21:20:15 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May  8 21:20:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11.csv
[Tue May  8 21:20:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May  8 21:20:18 2012] fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May  8 21:20:18 2012] Fit fullrun_mos2_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May  8 21:22:33 2012] Spatial fit model total counts = 13970.700000, observed total counts = 14032.000000
[Tue May  8 21:22:33 2012] Offset between fit and detection position for source 10 = 5.323130 pixels
[Tue May  8 21:22:33 2012] 13773.670000 total counts/ 9098.030000 bgd. counts: snr = 49.019331
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.323130 pixels
  Position = (288.2, 303.2) = 3 55 32.32 31 1 59.9
  Extent = 14.0 (14.0-14.0)", rotation angle = 0
  Source counts = 4675.6 +/- 117.4
  Background counts = 9098.0
  Rate = 0.04 +/- 0.001
[Tue May  8 21:22:34 2012] Source 10 is offset by 2.619816 and 0.600400 pixels which is larger than
2 X fitted extent = 0.820501 x 0.820501, not incorporating fit results
[Tue May  8 21:22:35 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:22:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:22:35 2012] Assessing source extent using major axis lower bound
[Tue May  8 21:22:35 2012] Source does appear to be extended
[Tue May  8 21:22:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 23:17:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 23:17:02 2012] Initial guess for spatial extent in simple fitting = 14.02"
[Tue May 15 23:17:02 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.155
[Tue May 15 23:17:02 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.02"