[Tue May  1 13:42:58 2012] Detection parameters:
  Position = (270.8, 309.3) = 3 55 38.20 31 2 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.5 +/- 30.2
  Background counts = 399.6
  Rate = 0.001 +/- 0.0003

[Tue May  1 13:42:58 2012] Off-axis axis estimate = 2.15'
[Wed May  2 15:32:37 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed May  2 15:32:37 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed May  2 15:32:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Wed May  2 15:32:37 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.50"
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77.csv
[Sun May  6 17:57:19 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77_1.ximg exists
[Sun May  6 17:57:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77.csv
[Sun May  6 17:57:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sun May  6 17:57:21 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sun May  6 17:57:22 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Tue May  8 21:21:49 2012] Source 87 is offset by -2.348041 and -4.863239 pixels which is larger than
2 X fitted extent = 0.982212 x 0.982212, not incorporating fit results
[Tue May  8 21:21:49 2012] Source 87 is offset by 2.868640 and 6.006968 pixels which is larger than
2 X fitted extent = 1.498648 x 1.498648, not incorporating fit results
[Tue May  8 21:21:49 2012] Vigneting correction estimate = 1.000000
[Tue May  8 21:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 21:21:49 2012] Assessing source extent using major
[Tue May  8 21:21:49 2012] Source does appear to be extended
[Tue May  8 21:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 21:21:49 2012] Source is confused with source 88
[Fri May 11 06:52:18 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:52:18 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri May 11 06:52:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Fri May 11 06:52:18 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 7.50"
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72.csv
[Tue May 15 23:17:00 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72_1.ximg exists
[Tue May 15 23:17:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72.csv
[Tue May 15 23:17:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 15 23:17:02 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Tue May 15 23:17:02 2012] fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Tue May 15 23:17:02 2012] Fit fullrun_mos1_xmm0600980101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly